Publications
Forthcoming
Adhesion and friction control localized folding in supported graphene
Zhang, K. and Arroyo, M.
To appear in Journal of Applied Physics
An adaptive meshfree method for phase- eld models of biomembranes. Part I: approximation with maximum-entropy approximants
A. Rosolen, C. Peco and M. Arroyo
To appear in Journal of Computational Physics
An adaptive meshfree method for phase- field models of biomembranes. Part II: a Lagrangian approach for membranes in viscous fluids
C. Peco, A. Rosolen and M. Arroyo
To appear in Journal of Computational Physics
Esquema adaptativo para problemas tridimensionales de convección-difusión
Monforte, L. and Pérez-Foguet, A.
To appear in Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería
Modal based goal-oriented error assessment for timeline-dependent quantities in transient dynamics
F. Verdugo, N. Parés and P. Díez
To appear in International Journal for Numerical Methods in Engineering
Nonlinear manifold learning for model reduction in finite elastodynamics
Millán, D. and Arroyo, M.
To appear in Computer Methods in Applied Mechanics and Engineering
Slope effects on SWAT modeling in a mountainous basin
Yacoub, C. and Pérez-Foguet, A.
To appear in ASCE Journal of Hydrologic Engineering
SUPG-based stabilization of Proper Generalized Decompositions for the high-dimensional Advection-Diffusion Equations
González, D.; Cueto, E.; Chinesta, F.; Díez, P. and Huerta, A.
To appear in International Journal for Numerical Methods in Engineering
The bipenalty method for arbitrary multipoint constraints
Hetherington, J.; Rodríguez-Ferran, A. and Askes, H.
To appear in International Journal for Numerical Methods in Engineering
Unravelling the linkages between water, sanitation, hygiene and rural poverty: the WASH Poverty Index
Giné. R. and Pérez-Foguet, A.
To appear in Water Resources Management
A family of discontinuous Galerkin mixed methods for nearly and perfectly incompressible elasticity
Shen, Y. and Lew, A. J.
To appear in Mathematical Modelling and Numerical Analysis
A finite element approach to the simulation of hydraulic fractures with lag
Hunsweck, M.l J.; Shen, Y. and Lew, A. J.
To appear in International Journal for Numerical and Analytical Methods in Geomechanics
An algorithm for mesh refinement and un-refinement in fast transient dynamics
Casadei, F.; Verdugo, F. and Díez, P.
To appear in International Journal of Computational Methods
Stability of anchored sheet wall in cohesive-frictional soils by FE limit analysis
Muñoz, J. J.; Lyamin, A. and Huerta, A.
To appear in International Journal for Numerical and Analytical Methods in Geomechanics
2013
A truss element for modelling reversible softening in living tissues
Muñoz, J.J.; Conte, V.; Asadipour, N.; and Miodownik, M.
Mechanics Research Communications, Vol. 49, pp. 44-49, 2013
Adaptive finite element simulation of stack pollutant emissions over complex terrains
Oliver, A., Montero, G., Montenegro, R., Rodríguez, E., Escobar, J.M., and Pérez-Foguet, A.
Energy, Vol. 49, pp. 47-60, 2013
An atomistic-based foliation model for multilayer graphene materials and nanotubes
Ghosh, S. and Arroyo, M.
Journal of the Mechanics and Physics of Solids, Vol. 61, Iss. 1, pp. 235-253, 2013
Computable exact bounds for linear outputs from stabilized solutions of the advection-diffusion-reaction equation
Parés, N.; Díez, P. and Huerta, A.
International Journal for Numerical Methods in Engineering, Vol. 96, Num. 5, pp. 483-509, 2013
Confined Bilayers Passively Regulate Shape and Stress
M. Staykova; M. Arroyo; M. Rahimi, and H. A. Stone
Physical Review Letters, Vol. 110, Num. 028101, pp. 1-5, 2013
Diffusion-reaction model for Drosophila embryo development
Allena, R.; Muñoz, J. J. and Aubry, D.
Computer Methods in Biomechanics and Biomedical Engineering, Vol. 16, Number 3, pp. 356-374, 2013
Dimensionless analysis of HSDM and application to simulation of breakthrough curves of highly adsorbent porous media
Pérez-Foguet, A.; Casoni, E.; and Huerta, A.
ASCE Journal of Environmental Engineering, Vol. 139, Number 5, pp. 667-676, 2013
Hybridizable Discontinuous Galerkin p-adaptivity for wave propagation problems
Giorgiani, G.; Fernández-Méndez, S.; and Huerta, A.
International Journal for Numerical Methods in Fluids, Vol. , pp. 0-0, 2013
Least-squares approximation of affine mappings for sweep mesh generation. Functional analysis and applications
Roca, X. and Sarrate, J.
Engineering with Computers, Vol. 29, Issue 1, pp. 1-15, 2013
Modal-based prediction of sound transmission through slits and openings between rooms
Poblet-Puig, J. and Rodríguez-Ferran, A.
Journal of Sound and Vibration, Vol. 332, Num: 5, pp. 1265-1287, 2013
Modelling of mixed damage on fibre reinforced composite laminates subjected to low velocity impact
Curiel, J.L.,Phaneendra, S. and Muñoz, J.J.
International Journal of Damage Mechanics, Vol. 22, Number 3, pp. 356-374, 2013
Nonlinear manifold learning for meshfree finite deformation thin shell analysis
Millán, D; Rosolen, A and Arroyo, M.
International Journal for Numerical Methods in Engineering, Vol. 93, Issue 7, pp. 685-713, 2013
One-dimensional shock-capturing for high-order Discontinuous Galerkin methods
Casoni, E.; Peraire, J. and Huerta, A.
International Journal for Numerical Methods in Fluids, Vol. 71, Iss. 6, pp. 737-755, 2013
PGD-Based Computational Vademecum for Efficient Design, Optimization and Control
Chinesta, F.; Leygue, A.; Bordeu, F.; Vicente Aguado, J.; Cueto, E.; González, D.; Alfaro, I.; Ammar, A. and Huerta, A.
Archives of Computational Methods in Engineering, Vol. 20, Issue 1, pp. 31-59, 2013
Second order convex maximum entropy approximants with applications to high order PDE
Rosolen, A.; Millan, D. and Arroyo, M.
International Journal for Numerical Methods in Engineering, Vol. 94, Issue 2, pp. 150-182, 2013
2012
A biomechanical analysis of ventral furrow formation in the Drosophila melanogaster embryoConte, V.; Ulrich, F. ;Baum, B.; Muñoz, J.; Veldhuis, J.; Brodland, W. and Miodownik, M.
Plos ONE, Vol. 7, Num. 4, pp. 1-17, 2012
A new bipenalty formulation for ensuring time step stability in time domain computational dynamics
Hetherington, J.; Rodríguez-Ferran, A. and Askes, H.
International Journal for Numerical Methods in Engineering, Vol. 90, Issue: 3, pp. 269-286, 2012
A note on upper bound formulations in limit analysis
Muñoz, J. J.; Huerta, A.; Bonet, J. and J. Peraire
International Journal for Numerical Methods in Engineering, Vol. 91, Iss. 8, pp. 896-908, 2012
A simple shock-capturing technique for high-order discontinuous Galerkin methods
Huerta, A.; Casoni, E. and Peraire, J.
International Journal for Numerical Methods in Fluids, Vol. 69, Iss. 10, pp. 1614-1632, 2012
Adaptive reduced basis strategy based on goal oriented error assessment for stochastic problems
Florentin, E. and Díez, P.
Computer Methods in Applied Mechanics and Engineering, Vol. 225, pp. 116-127, 2012
Are High-order and Hybridizable Discontinuous Galerkin methods competitive?
Huerta, A.; Roca, X.; Aleksandar, A. and Peraire, J.
Oberwolfach Reports, Vol. 9, Number: 1, pp. 485-487, 2012
Computable bounds of functional outputs in linear visco-elastodynamics
Verdugo, F. and Díez, P.
Computer Methods in Applied Mechanics and Engineering, Vol. 245-246, pp. 313-330, 2012
Condiciones de contorno en modelos de gradiente con desplazamientos suavizados
Tamayo-Mas, E. and Rodríguez-Ferran, A.
Revista Internacional Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 28, Num. 3, pp. 170-176, 2012
Crack initiation patterns at electrode edges in multilayer ferroelectric actuators
Abdollahi, A. and Arias, I.
Smart Materials and Structures, Vol. 21, Num. 9, pp. 1-11, 2012
Enforcing interface flux continuity in enhanced XFEM: stability analysis
Díez, P.; Zlotnik, S. and Cottereau, R.
Oberwolfach Reports, Vol. 9, Num: 1, pp. 523-526, 2012
Estimation of crack opening from a two-dimensional continuum-based finite element computation
Dufour, F.; Legrain, G.; Pijaudier-Cabot, G. and Huerta, A.
International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 36, Iss. 16, pp. 1813-1830, 2012
Finite Element simulation of a local scale Air Quality Model over complex terrain
Oliver, A.; Montero, G.; Montenegro, R.; Rodríguez, E.; Escobar, J.M. and Pérez-Foguet, A.
Advances in Science and Research, Vol. 8, pp. 105-113, 2012
Formation of tip-vortices on triangular prismatic-shaped cliffs. Part 1: A wind tunnel study
Cochard, S.; Letchford, C. W.; Earl, T. A. and Montlaur A.
Wind Engineering & Industrial Aerodynamics, Vol. 109, pp. 9-20, 2012
Formation of tip-vortices on triangular prismatic-shaped cliffs. Part 2: A computational fluid dynamics study
Montlaur A.; Cochard, S. and Fletcher, D.F.
Wind Engineering and Industrial Aerodynamics, Vol. 109, pp. 21-30, 2012
High-order implicit time integration for unsteady incompressible flows
Montlaur, A.; Fernández-Méndez, S. and Huerta, A.
International Journal for Numerical Methods in Fluids, Vol. 70, Issue 5, pp. 603-626, 2012
Modeling steel fiber reinforced concrete: numerical immersed boundary approach and a phenomenological mesomodel for concrete-fiber interaction
Pros, A.; Díez, P. and Molins, C.
International Journal for Numerical Methods in Engineering, Vol. 90, Issue 1, pp. 65-86, 2012
Numerical simulation of intergranular and transgranular crack propagation in ferroelectric polycrystals
Abdollahi, A. and Arias, I.
International Journal of Fracture, Vol. 174, Number 1, pp. 3-15, 2012
Phase-field Modeling of Crack Propagation in Piezoelectric and Ferroelectric Materials with Different Electromechanical Crack Conditions
Abdollahi, A. and Arias, I.
Journal of the Mechanics and Physics of Solids, Vol. 60, pp. 2100-2126, 2012
Proper Generalized Decomposition Based Dynamic Data-Driven Control of Material Forming Processes
Ghnatios, C.; Masson, F.; Huerta, A.; Leygue, A.; Cueto, E. and Chinesta, F.
Computer Methods in Applied Mechanics and Engineering, Vol. 213-216, pp. 29-41, 2012
Quality and year-round availability of water delivered by improved water points in rural Tanzania: effects on coverage
Jiménez, A. and Pérez-Foguet, A.
Water Policy, Vol. 14, Issue 3, pp. 509-523, 2012
Reverse engineering the euglenoid movement
Arroyo, M.; Heltai, L.; Millán, D. and DeSimone, A.
Proceedings of the National Academy of Science USA, Vol. 109, pp. 17874-17879, 2012
Shape dynamics, lipid hydrodynamics and the complex viscoelasticty of bilayer membranes
Rahimi, M. and Arroyo, M.
Physical Review E., Vol. 86, Num. 1, pp. 11932-11947, 2012
The finite layer method for modelling the sound transmission through double walls
Díaz-Cereceda, C.; Poblet-Puig, J. and Rodríguez-Ferran, A.
Journal of Sound and Vibration, Vol. 331, Iss. 2, pp. 4884-4900, 2012
The receding front method applied to hexahedral mesh generation of exterior domains
Ruiz-Gironés, E.; Roca, X. and Sarrate, J.
Engineering with Computers, Vol. 28, Issue 4, pp. 391-408, 2012
Thin-shell theory based analysis of radially pressurized multiwall carbon nanotubes
Shima, H.; Ghosh, S.; Arroyo, M.; Iiboshi, K. and Sato, M.
Computational Materials Science, Vol. 52, Issue 1, pp. 90-94, 2012
Trace Metal Content of Sediments Close to Mine Sites in the Andean Region
Yacoub, C.; Pérez-Foguet, A. and Miralles, N.
Scientific World Journal, Vol. -, pp. 1-12, 2012
Un método de captura de choques basado en las funciones de forma para Galerkin discontinuo de alto orden
Casoni, E.; Peraire, J., and Huerta, A.
Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 28, Issue 4, pp. 204-213, 2012
2011
3D NURBS-Enhanced Finite Element Method (NEFEM)Sevilla, R;, Fernandez-Mendez, S. and Huerta A.
International Journal for Numerical Methods in Engineering, Vol. 88, Issue 2, pp. 103-125, 2011
A deterministic model of impact noise transmission through structural connections based on modal analysis
Díaz-Cereceda, C.; Hetherington, J.; Poblet-Puig, J. and Rodríguez-Ferran, A.
Journal of Sound and Vibration, Vol. 330, Issue 12, pp. 2801-2817, 2011
A general framework for softening regularisation based on gradient elasticity
Rodríguez-Ferran, A.;Bennett, T.; Askes, H. and Tamayo-Mas, E.
International Journal of Solids and Structures, Vol. 48, Issue 9, pp. 1382-1394, 2011
Analyzing Water Poverty in Basins
Pérez-Foguet, A. and Giné, R.
Water Resources Management , Vol. 25, Issue 14, pp. 3595-3612, 2011
Application of a revised Water Poverty Index to target the water poor
Gine, R., and Pérez-Foguet, A.
Water Science and Technology , Vol. 63, Issue: 6, pp. 1099-1110, 2011
Comparison of high-order curved finite elements
Sevilla, R.; Fernandez-Mendez, S. and Huerta, A.
International Journal for Numerical Methods in Engineering, Vol. 87, Issue 8, pp. 719-734, 2011
Damage regularisation with inertia gradients
Bennet, T.; Rodríguez-Ferran, A. and Askes, H.
European Journal of Mechanics - A/Solids, Vol. 31, Issue 1, pp. 131-138, 2011
Estimation of the dispersion error in the numerical wave number of standard and stabilized finite element approximations of the Helmholtz equation
Steffens, L. M.; Parés, N. and Díez, P.
International Journal for Numerical Methods in Engineering, Vol. 86 Issue 10, pp. 1197-1224, 2011
Goal-oriented h-adaptivity for the Helmholtz equation: error estimates, local indicators and refinement strategies
Steffens, L. M.; Parés, N. and Díez, P.
Computational Mechanics, Vol. 47 Number 6, pp. 681-699, 2011
Implementing pro-poor policies in a decentralized context: the case of the Rural Water Supply and Sanitation Program in Tanzania
Jiménez, A.; Pérez-Foguet, A.
Sustainability Science, Vol. 6, Issue 1, pp. 37-49, 2011
Métodos Runge-Kutta Implícitos de alto orden para flujo incompresible
Montlaur, A.; Fernández-Méndez, S. and Huerta A.
Revista Internacional Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 27, Issue 1, pp. 77-91, 2011
Magma fracturing and healing: a mechanism for rhyolite magma degassing and origin of obsidian
Cabrera, A.; Weinberg, R.; Wrigth, H.; Zlotnik, S. and Cas, R.
Geology, Vol. 39, pp. 67-70, 2011
Modeling dimensionally-heterogenenous problems: analysis, approximation and applications.
Blanco, P. J.; Discacciati, M. and Quarteroni, A.
Numerische Mathematik, Vol. 119, pp. 299-335, 2011
Numerical integration over 2D NURBS-shaped domains with applications to NURBS-enhanced FEM
Sevilla, R. and Fernández-Méndez S.
Finite Elements in Analysis and Design, Vol. 47, pp. 1209-1220, 2011
Numerical modeling of erosion using an improvement of the extended finite element method
Cottereau, R and Díez, P
European Journal of Environmental and Civil Engineering, Vol. 15, pp. 1187-1206, 2011
Numerical modeling of the Double Punch Test for plain concrete
Pros, A.; Díez, P. and Molins, C.
International Journal of Solids and Structures, Vol. 48, Issues 7-8, pp. 1229-1238, 2011
NURBS-Enhanced Finite Element Method (NEFEM). A Seamless Bridge Between CAD and FEM
Sevilla, R.; Fernández-Méndez, S. and Huerta, A.
Archives of Computational Methods in Engineering, Vol. 18, Issue 4, pp. 441-484, 2011
Phase-field modeling of the coupled microstructure and fracture evolution in ferroelectric single crystals
Abdollahi, A. and Arias, I.
Acta Materialia, Vol. 59, Issue 12, pp. 4733-4746, 2011
Phase-field simulation of anisotropic crack propagation in ferroelectric single crystals: effect of microstructure on the fracture process
Abdollahi, A and Arias, I
Modelling and Simulation in Material Science and Engineering, Vol. 19, Num. 7, Issue 7, pp. 1-13, 2011
Subduction dynamics and the origin of Andean orogeny and Bolivian Orocline
F. Capitanio, Faccena, C.; Zlotnik, S. and Stegman, D.
Nature, Vol. 490, pp. 83-86, 2011
The finite strip method for acoustic and vibroacoustic problems
Poblet-Puig, J. and Rodríguez-Ferran, A.
Journal of Computational Acoustics, Vol. 19, Number: 4, pp. 353-378, 2011
The relationship between technology and functionality of rural water points: evidence from Tanzania
Jiménez, A. and Pérez-Foguet, A.
Water Science and Technology, Vol. 63, Issue 5, pp. 948-955, 2011
The subductability of continental lithosphere: the before and after story
Afonso, J.C. and Zlotnik, S.
Frontiers in Earth Sciences, Vol. 1, pp. 53-86, 2011
Thin shell analysis from scattered points with maximum-entropy approximants
Millán, D; Rosolen, A and Arroyo, M.
International Journal for Numerical Methods in Engineering, Vol. 85, Iss. 6, pp. 723-751, 2011
Using a computational domain and a three-stage node location procedure for multi-sweeping algorithms
Ruiz-Gironés, E., Roca, X. and Sarrate, J.
Advances in Engineering Software, Vol. 42, pp. 700-713, 2011
Water Point Mapping for the Analysis of Rural Water Supply Plans: Case Study from Tanzania
Jiménez, A.; Pérez-Foguet, A.
ASCE Journal of Water Resources Planning and Management, Vol. 137, Issue: 5, pp. 439-447, 2011
2010
A flux-free a posteriori error estimator for the incompressible Stokes problem using a mixed FE formulationLarsson, F; Díez, P and Huerta, A.
Computer Methods in Applied Mechanics and Engineering, Vol. 199, pp. 2383-2402, 2010
A multiplicative Schwarz method with active subdomains for transient convection-diffusion problems
Sandoval, M.L. and Rodríguez-Ferran, A.
Communications in Numerical Methods in Engineering, Vol. 26, Issue 12, pp. 1573-1585, 2010
A new least-squares approximation of affine mappings for sweep algorithms
Roca, X., Sarrate, J and Huerta, A.
Engineering with Computers, Vol. 26, Issue 3, pp. 327-337, 2010
Accurate recovery-based upper error bounds for the extended finite element framework
Ródenas, J.J.; González-Estrada, O.A.; Díez, P. and Fuenmayor, F.J.
Computer Methods in Applied Mechanics and Engineering, Vol. 199, pp. 2607-2621, 2010
An automatic and general least-squares projection procedure for sweep meshing
Roca, X. and Sarrate, J.
Engineering with Computers, Vol. 26, Issue 4, pp. 391-406, 2010
An error estimator for separated representations of highly multidimensional models
Ammar A; Chinesta F; Díez, P and Huerta, A
Computer Methods in Applied Mechanics and Engineering, Vol. 199, Issues 25-28, pp. 1872-1880, 2010
Assembling sparse matrices in MATLAB
Zlotnik, S. and Díez, P.
Communications in Numerical Methods in Engineering, Vol. 26, Issue 6, pp. 760-769, 2010
Bipenalty method for time domain computational dynamics
Askes, H.; Caramés-Saddler, M and Rodríguez-Ferran, A.
Proceedings of the Royal Society A, Vol. 466, pp. 1389-1408, 2010
Building the role of local government authorities towards the achievement of the human right to water in rural Tanzania
Jiménez, A. and Pérez-Foguet, A.
Natural Resources Forum, Vol. 34, Issue 2, pp. 93-105, 2010
Challenges for water governance in rural water supply: lessons learnt from Tanzania
Jiménez, A. and Pérez-Foguet, A.
International Journal of Water Resources Development, Vol. 26, Issue 2, pp. 235-248, 2010
Controls on subduction reorganization in the Hellenic margin, eastern Mediterranean
Capitanio, F.; Zlotnik, S. and Faccena, C.
Geophysical Research Letters, Vol. 37, pp. 1-5, 2010
Discontinuous Galerkin methods for the Navier-Stokes equations using solenoidal approximations
Montlaur, A.; Fernandez-Mendez,S.; Peraire, J. and Huerta, A.
International Journal for Numerical Methods in Fluids, Vol. 64, Issue 5, pp. 549-564, 2010
Diverse corrugation pattern in radially shrinking carbon nanotubes
Shima, H.; Sato, M.; Iiboshi K.; Ghosh S. and Arroyo M.
Physical Review B, Vol. 82, Issue 8, pp. 0-0, 2010
Error assessment and mesh adaptivity for regularized continuous failure models
Pannachet, T; Díez, P; Askes, H and Sluys, L. J.
Computer Methods in Applied Mechanics and Engineering, Vol. 199, pp. 961-978, 2010
Error Estimation and Quality Control
Diez, P.; Parés, N. and Huerta, A.
Encyclopedia of Aerospace Engineering, Wiley, Vol. 3, Part 15, Chapter 144, pp. 1725-1734, 2010
Generation of structured hexahedral meshes in volumes with holes
Ruiz-Gironés, E. and Sarrate, J.
Finite Elements in Analysis and Design, Vol. 46, Issue 10, pp. 792-804, 2010
Generation of structured meshes in multiply connected surfaces using submapping
Ruiz-Gironés, E. and Sarrate, J.
Advances in Engineering Software, Vol. 41, Issue 2, pp. 379-387, 2010
Improved method to calculate a Water Poverty Index at local scale
Giné, R. and Pérez-Foguet, A.
ASCE Journal of Environmental Engineering, Vol. 136, Issue 11, pp. 1287-1298, 2010
Local dual contributions: Representing dual surfaces for block meshing
Roca, X. and Sarrate, J.
International Journal for Numerical Methods in Engineering, Vol. 83, Issue 6, pp. 709-740, 2010
Modeling, with a unified level-set representation, of the expansion of a hollow in the ground under different physical phenomena
Cottereau, R; Díez, P and Huerta, A
Computational Mechanics, Vol. 42, Issue 2, pp. 315-327, 2010
Numerical analysis of the Navier-Stokes/Darcy coupling.
Badea, L.; Discacciati, M. and Quarteroni, A.
Numerische Mathematik, Vol. 115, pp. 195-227, 2010
On the optimum support size in meshfree methods: a variational adaptivity approach with maximum entropy approximants
Rosolen, A,; Millán, D. and Arroyo, M.
International Journal for Numerical Methods in Engineering, Vol. 82, Issue 7, pp. 868-895, 2010
Stability and convergence proofs for a discontinuous-Galerkin-based extended finite element method for fracture mechanics
Shen, Y. and Lew, A.
Computer Methods in Applied Mechanics and Engineering, Vol. 199, pp. 2360-2382, 2010
Stress-dependent morphogenesis: continuum mechanics and truss systems
Muñoz, J; Conte, V and Miodownik, M
Biomechanics and Modeling in Mechanobiology, Vol. 9, Issue 4, pp. 451-467, 2010
Strict error bounds for linear and nonlinear solid mechanics problems using a patch-based flux-free method
Cottereau, R., Chamoin, L. and Díez, P.
Mécanique & Industries, Vol. 11 Number 3-4, pp. 249-254, 2010
SUPG-based stabilization using a separated representations approach
González, D.; Debeugny, L.; Cueto, E.; Chinesta, F.; Díez, P. and Huerta, A.
International Journal of Material Forming, Vol. 3, pp. 883-886, 2010
The block Gauss-Seidel method in sound transmission problems
Poblet-Puig, J. and Rodríguez-Ferran, A
Journal of Computational Acoustics, Vol. 18, Issue 1, pp. 13-30, 2010
XFEM+: una modificación de XFEM para mejorar la precisión de los flujos locales en problemas de difusión con conductividades muy distintas
Cordero, F. and Díez, P.
Revista Internacional Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 26, Issue 2, pp. 121-133, 2010
2009
A simple strategy to assess the error in the numerical wave number of the Finite Element solution of the Helmholtz equationSteffens, L.M.,Díez, P.
Computer Methods in Applied Mechanics and Engineering, Vol. 198, Issues 15-16, pp. 1389-1400, 2009
An optimally convergent discontinuous Galerkin-based extended finite element method for fracture mechanics
Shen, Y. and Lew, A.
International Journal For Numerical Methods in Engineering, Vol. 82, pp. 716-755, 2009
Effective coarse-grained simulations of super-thick multi-walled carbon nanotubes under torsion
Jian Zou, Xu Huang, Marino Arroyo, and Sulin Zhang
Journal of Applied Physics, Vol. 5, Issue 3, pp. 33516-9, 2009
Elastic bending modulus of monolayer graphene
Lu, Q; Arroyo, M and Huang, R
Journal of Physics D: Applied Physics, Vol. 42, Issue10, pp. 102002-102009, 2009
Estima de error residual explícita para cantidades de interés utilizando funciones burbuja
Rosales, R. and Díez, P.
Revista Internacional Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 25, Issue 4, pp. 337-357, 2009
Exact bounds for linear outputs of the advection-diffusion-reaction equation using flux-free error estimates
Parés, N., Díez, P., Huerta, A.
Journal on Scientific Computing, SIAM, Vol. 31, Issue 4, pp. 3064-3089, 2009
Experimental validation of large-scale simulations of dynamic fracture along weak planes
Chalivendra, V.B., Hong, S., Arias, I., Knap, J., Rosakis, A. J., Ortiz, M.
International Journal of Impact Engineering, Vol. 36, Issue 7, pp. 888-898, 2009
Guaranteed energy error bounds for the Poisson equation using a flux-free approach: solving the local problems in subdomains
Parés, N., Santos, H., and Díez, P.
International Journal for Numerical Methods in Engineering, Vol. 79, Issue 10, pp. 1203-1244, 2009
Hierarchical X-FEM for n-phase flow (n>2)
Zlotnik, S., Díez, P.
Computer Methods in Applied Mechanics and Engineering, Vol. 198 Issues 30-32, pp. 2329-2338, 2009
International Investments in the Water Sector
Jiménez, A. and Pérez-Foguet, A.
International Journal of Water Resources Development, Vol. 25, Issue: 1, pp. 1-14, 2009
Modeling of amino acid nanofiltration by irreversible thermodynamics.
Kovács, Z.; Discacciati, M. and Samhaber, W.
Journal of Membrane Science, Vol. 332, Iss. 1-2, pp. 38-49, 2009
Navier-Stokes/Darcy coupling: modeling, analysis, and numerical approximation.
Discacciati, M. and Quarteroni, A.
Revista Matemática Complutense, Vol. 22, Num. 2, pp. 315-426, 2009
Numerical modelling of the radiation efficiency of asymmetrical structures
Poblet-Puig, J., Rodríguez-Ferran, A., Guigou-Carter, C. and Villot, M.
Applied Acoustics, Vol. 70, Issue 5, pp. 777-780, 2009
Relaxation dynamics of fluid membranes
Arroyo, M. and DeSimone, A.
Physical Review E, Vol. 79, Issue 3, pp. 31914-31898, 2009
Robust mechanisms of ventral furrow invagination require the combination of cellular shape changes
Conte, V.; Muñoz, J.; Baum, B. and Miodownik M.
Physical Biology, Vol. 6, Issue 1, pp. 16010-16021, 2009
Smooth, second order, non-negative meshfree approximants selected by maximum entropy
C.J. Cyron, M. Arroyo, M. Ortiz
International Journal for Numerical Methods in Engineering, Vol. 79, pp. 1605-1632, 2009
Strict error bounds for linear solid mechanics problems using a subdomain-based flux-free method
Cottereau, R; Díez, P and Huerta, A
Computational Mechanics, Vol. 44, Issue 4, pp. 533-547, 2009
The role of studs in the sound transmission of double walls
Poblet-Puig, J., Rodríguez-Ferran, A., Guigou-Carter, C. and Villot, M.
Acta Acustica United with Acustica, Vol. 45, Issue 3, pp. 555-567, 2009
Upper and lower bounds in limit analysis: adaptive meshing strategies and discontinuous loading
Muñoz, J.J., Bonet, J., Huerta, A., Peraire, J.
International Journal for Numerical Methods in Engineering, Vol. 77, Issue 4, pp. 471-501, 2009
2008
Simulating and interpreting Kelvin probe force microscopy images on dielectrics with boundary integral equationsShen, Y.; Barnett, D. and Pinsky, P.
Review of Scientific Instruments, Vol. 79, pp. 1-11, 2008
A 3D finite element model of ventral furrow invagination in the Drosophila melanogaster embryo
Vito, C., Muñoz, J.J., Miodownik M.
Journal of the Mechanical Behavior of Biomedical Materials, Vol. 1, Issue 2, pp. 188-198, 2008
A three-dimensional progressive damage model for fibre-composite materials
Curiel, JL, Petrinic, N. and Wiegand, J.
Mechanics Research Communications, Vol. 35, Issue 4, pp. 219-221, 2008
Analytic perturbation solution to the capacitance system of a hyberboloidal tip and a rough surface
Shen, Y.; Barnett, D. and Pinsky, P.
Applied Physics Letters, Vol. 92, pp. 1-3, 2008
Assembling sparse matrices in Matlab
Zlotnik, S. and Díez, P.
International Journal for Numerical Methods in Biomedical Engineering, Vol. 26, Iss. 6, pp. 760-769, 2008
Bounds for quantities of interest and adaptivity in the Element Free Galerkin method
Vidal, Y., Parés, N., Díez, P., Huerta, A.
International Journal for Numerical Methods in Engineering, Vol. 76, Issue 11, pp. 1782-1818, 2008
Bounds of functional outputs for parabolic problems. Part I: Exact bounds of the Discontinuous Galerkin time discretization
Parés, N., Díez, P. and Huerta, A..
Computer Methods in Applied Mechanics and Engineering, Vol. 197, Issues 19-20, pp. 1641-1660, 2008
Bounds of functional outputs for parabolic problems. Part II: Bounds of the exact solution
Parés, N., Díez, P. and Huerta, A..
Computer Methods in Applied Mechanics and Engineering, Vol. 197, Issues 19-20, pp. 1661-1679, 2008
Discontinuous Galerkin methods for the Stokes equations using divergence-free approximations
Montlaur, A., Fernández-Méndez, S., Huerta, A.
Intermational Journal for Numerical Methods in Fluids., Vol. 57, Issue 9, pp. 1071-1092, 2008
Discretización de superficies mútiplemente conexas mediante submapping
Ruiz-Gironés, E. y Sarrate, J.
Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. Vol 24, Issue 2, pp. 163-181, 2008
Extraction of a crack opening from a continuous approach using regularized damage models
Dufour, F., Gilles Pijaudier-Cabot, G.,Choinska, M. and Huerta, A.
Computers and Concrete, Vol. Vol. 5, Issue 4, pp. 375-388, 2008
Improving water access indicators in developing countries: a proposal using water point mapping methodology
Jiménez, A. and Pérez-Foguet, A.
Water Science and Technology: Water Supply, Vol. 8, Issue 3, pp. 279-287, 2008
Introducing development education in technical universities: successful experiences in Spain
Boni, A. and Pérez-Foguet, A.
European Journal of Engineering Education, Vol. 33, Issue 3, pp. 343-354, 2008
Modeling and optimization of a novel Micro Opto Xray Imaging Lens
Ostadi, H., Arroyo, M., Prewett, P.D., Jiang, K.C. and Huq , S.E
Microelectronic Engineering, Vol. 85, Issues 5-6, pp. 1086-1088, 2008
Modeling electrostatic force microscopy for conductive and dielectric samples using the boundary element method
Shen, Y.; Barnett, D. and Pinsky, P.
Engineering Analysis with Boundary Elements, Vol. 32, pp. 682-691, 2008
Modelling Gravitational Instabilities: Slab Break-off and Rayleigh-Taylor Diapirism
Zlotnik, S., Fernández, M., Díez, P. and Vergés, J.
Pure and Applied Geophysics, Vol. 165, Issue 8, pp. 1491-1510, 2008
Modelling unilateral frictionless contact using the null-space method and cubic B-Spline interpolation
Muñoz, J.J.
Computer Methods in Applied Mechanics and Engineering, Vol. 197, Issues 9-12, pp. 979-993, 2008
NURBS-Enhanced Finite Element Method (NEFEM)
Sevilla, R., Fernandez-Mendez, S., Huerta, A.
International Journal for Numerical Methods in Engineering, Vol. 76, Issue 1, pp. 56-83, 2008
NURBS-Enhanced Finite Element Method for Euler equations
Sevilla, R., Fernandez-Mendez, S., Huerta, A.
International Journal for Numerical Methods in Fluids., Vol. 57, Issue 9, pp. 1051-1069, 2008
On the modelling of incompressibility in linear and non-linear elasticity with the master-slave approach
Muñoz, J.J.
International Journal for Numerical Methods in Engineering, Vol. 74, Issue 2, pp. 269-293, 2008
Rippling and a phase-transforming mesoscopic model for multiwalled carbon nanotubes
Arroyo, M., Arias I.
Journal of the Mechanics and Physics of Solids, Vol. 56, Issue 4, pp. 1224-1244, 2008
Size dependent nonlinear elastic scaling of multiwalled carbon nanotubes
Arias I., Arroyo, M.
Physical Review Letters, Vol. 100, Issue 8, pp. 85503-0, 2008
Small-scale gravitational instabilities under the oceans: implications for the evolution of oceanic lithosphere and its expression in geophysical observables
Zlotnik, S., Afonso, J.C., Díez, P, and Fernández, M.
PHILOSOPHICAL MAGAZINE, Vol. 88, Issues 28-29, pp. 3197-3217, 2008
Stability of incompressible formulations enriched with X-FEM
G. Legrain, N. Moes and A. Huerta
Computer Methods in Applied Mechanics and Engineering, Vol. 197, Issues 21-24, pp. 1835-1849, 2008
Sustainability Assessment Of National Rural Water Supply Program In Tanzania
Giné, R. and Pérez-Foguet, A.
Natural Resources Forum, Vol. 32, Issue 4, pp. 287-302, 2008
The effects of compositional and rheological stratifications on small-scale convection under the oceans: implications for the thickness of the oceanic lithosphere and seafloor flattening
Afonso, J.C.; Zlotnik, S. and Fernández, M.
Geophysical Research Letters, Vol. 35, pp. 1-5, 2008
2007
A resolution study for electrostatic force microscopy on bimetallic samples using the boundary element methodShen Y.; Lee, M.; Lee, W.; Barnett, D.; Pinsky, P. and Prinz, F.
IOP Nanotechnology, Vol. 19, pp. 2-14, 2007
A deformation gradient decomposition method for the analysis of the mechanics of morphogenesis
Muñoz, J.J., Barrett, K., Miodownik M.
Journal of Biomechanics, Vol. 40, Issue 6, pp. 1372-1380, 2007
Equilibrated Patch Recovery error estimates: simple and accurate upper bounds of the error
Diez, P., Rodenas, J.J. Juan and Zienkiewicz, O.C.
International Journal for Numerical Methods in Engineering, Vol. 69, Issue 10, pp. 2075-2098, 2007
Experimental testing of joints for seismic design of lightweight structures. Part 3: Gussets, corner joints, x-braced frames.
Casafont M, Arnedo A, Roure F, Rodriguez-Ferran A
Thin-Walled Structures, Vol. 45, Issues 7-8, pp. 637-659, 2007
Goal oriented error estimation for the Element Free Galerkin method
Vidal, Y. and Huerta, A.
Lecture Notes on computational science and engineering, Vol. 57, pp. 265-282, 2007
Goal-oriented error estimation for transient parabolic problems
Pedro Díez, Giovanni Calderón
Computational Mechanics, Vol. 39, Issue 5, pp. 631-646, 2007
Hydraulic behaviour of a representative structural volume for containment buildings
Jason, L., Pijaudier-Cabot , G., Ghavamian, S., Huerta, A.
Nuclear Engineering and Design, Vol. 237, Issues 12-13, pp. 1259-1274, 2007
Minimización de la distorsión de mallas formadas por cuadriláteros o hexaedros
Sarrate, J. y Coll, A.
Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 23, Issue 1, pp. 55-76, 2007
Numerical modelling and experimental validation of dynamic fracture events along weak planes
I. Arias, J. Knap, V. Chalivendra, S. Hong, M. Ortiz and A.J. Rosakis
Computer Methods in Applied Mechanics and Engineering, Vol. 196, Issues 37-40, pp. 3833-3840, 2007
Numerical Modelling of Tectonic Plates Subduction using X-FEM
Zlotnik, S., Díez, P., Fernández, M. and Vergés, J.
Computer Methods in Applied Mechanics and Engineering, Vol. 196, Issues 41-44, pp. 4283-4293, 2007
Numerical Performance of Incomplete Factorizations for 3D Transient Convection-Diffusion Problems
A. Rodríguez-Ferran and M. L. Sandoval
Advances in Engineering Software, Vol. 38, Issue 6, pp. 439-450, 2007
On the geometric character of stress in continuum mechanics
Kanso E., Arroyo M., Tong Y., Yavari A., Marsden J.E. and Desbrun M
Zeitschrift für Angewandte Mathematik und Physik (ZAMP), Vol. 58, Issue 5, pp. 843-856, 2007
Remeshing criteria and proper error representations for goal oriented h-adaptivity
Díez, P. and Calderon, G.
Computer Methods in Applied Mechanics and Engineering, Vol. 196, Issue 4, pp. 719-733, 2007
Robin–Robin domain decomposition methods for the Stokes–Darcy coupling.
Discacciati, M.; Quarteroni, A. and Valli, A.
SIAM J. on Numerical Analysis, Vol. 45, pp. 1246-1268, 2007
Stabilized updated Lagrangian corrected SPH for explicit dynamic problems
Vidal, Y., Bonet, J. and Huerta, A.
International Journal for Numerical Methods in Engineering, Vol. 69, Issue 13, pp. 2687-2710, 2007
2006
Étude de la stabilité d'une formulation incompressible traitée par X-FEMLegrain, G., Moes, N. and Huerta, A.
European Journal of Computational Mechanics (Revue Européenne de Mécanique Numérique), Vol. 15, Issues 1, 2, 3, pp. 257-268, 2006
A combined implicit-explicit algorithm for nonlinear finite element analysis
Curiel Sosa, J.L. , de Souza Neto E. and Owen D.R.J.
Communications in Numerical Methods in Engineering, Vol. 22 Issue 1, pp. 63-75, 2006
A phenomenological cohesive model of ferroelectric fatigue
I. Arias, S. Serebrinsky, M. Ortiz
ACTA MATERIALIA, Vol. 54, Issue 4, pp. 975-984, 2006
An elastic plastic damage formulation for concrete: application to elementary and structural tests
Jason, L. Huerta, A. Pijaudier-Cabot, G and Ghavamian, S.
Computer Methods in Applied Mechanics and Engineering, Vol. 195, Issue 52, pp. 7077-7092, 2006
Análisis de diferentes estimadores de error de postproceso para adaptatividad orientada al resultado
Giovanni Calderón y Pedro Díez
Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 22 Issue 2, pp. 193-213, 2006
Computing upper and lower bounds for the J-integral in two-dimensional linear elasticity
Z.C. Xuan, N. Parés and J. Peraire
Computer Methods in Applied Mechanics and Engineering, Vol. 195, pp. 430-443, 2006
Experimental testing of joints for seismic design of lightweight structures. Part 1: screwed joints in straps
Casafont, M., Arnedo, A., Roure, F. and Rodríguez-Ferran, A.
Thin-Walled Structures, Vol. 44, Issue 2, pp. 131-270, 2006
Experimental testing of joints for seismic design of lightweight structures. Part 2: Bolted joints in straps*
Casafont, M., Arnedo, A., Roure, F., and Rodríguez-Ferran, A.
Thin-Walled Structures, Vol. 44, Issue 6, pp. 677-691, 2006
Fluid-structure algorithms based on Steklov-Poincaré operators.
Deparis, S.; Discacciati, M.; Fourestey, G. and Quarteroni, A.
Computer Methods in Applied Mechanics and Engineering, Vol. 195, Iss. 41-43, pp. 5797-5812, 2006
Improved predictive modelling of strain localisation and ductile fracture in a Ti-6Al-4V alloy subjected to impact loading
Petrinic, N. , Curiel Sosa, J.L. , Siviour, C.R. , Elliot, B.C.F.
JOURNAL DE PHYSIQUE IV, Vol. 134, Issue 1, pp. 147-155, 2006
Local maximum-entropy approximation schemes: a seamless bridge between finite elements and meshfree methods
Marino Arroyo and Michael Ortiz
International Journal for Numerical Methods in Engineering, Vol. 65, Issue 13, pp. 2167-2202, 2006
Mesh projection between parametric surfaces
X. Roca, J. Sarrate and A. Huerta
Communications in Numerical Methods in Engineering, Vol. 22, Issue 6, pp. 591-603, 2006
On the numerical simulation of fatigue driven delamination with interface elements
Muñoz, J; Galvanetto, U and Robinson, P
International Journal of Fatigue, Vol. 28, Issue 10, pp. 1136-1146, 2006
Preface
N.-E. Wiberg and P. Díez
Computer Methods in Applied Mechanics and Engineering, Vol. 195, Issues 4-6, pp. 205-206, 2006
Sliding joints in 3D beams: Conserving algorithms using the master–slave approach
Muñoz, J and Jelenic
Multibody System Dynamics, Vol. 16, Issue 3, pp. 237-261, 2006
Subdomain-based flux-free a posteriori error estimators
Núria Parés, Pedro Díez and Antonio Huerta
Computer Methods in Applied Mechanics and Engineering, Vol. 195, Issues 4-6, pp. 297-323, 2006
The computation of bounds for linear-functional outputs of weak solutions to the two-dimensional elasticity equations
N. Parés, J. Bonet, A. Huerta and J. Peraire
Computer Methods in Applied Mechanics and Engineering, Vol. 195, Issues 4-6, pp. 406-429, 2006
Updated Lagrangian formulation for corrected Smooth Particle Hydrodynamics
Huerta, A., Vidal, Y. and Bonet, J.
International Journal of Computational Methods, Vol. 3, Issue 4, pp. 383-399, 2006
2005
A new damage model based on nonlocal displacementsRodríguez-Ferran, A., Morata, I. and Huerta, A.
International Journal for Numerical and Analytical Methods in Geomechanics, Vol. Vol 29, Issue 5, pp. 473-493, 2005
An extended invariant line analysis for fcc/bcc precipitation systems
Qiu, D.; Shen, Y. and Zhang, W.
Acta Materiala, Vol. 54, Issue 2, pp. 339-347, 2005
Continuous blending of SPH with finite elements
Sonia Fernández-Méndez, Javier Bonet and Antonio Huerta
Computers and Structures, Vol. 83, Issues 17-18, pp. 1448-1458, 2005
Continuum mechanics modeling and simulation of carbon nanotubes
Marino Arroyo and Ted Belytschko
Meccanica, Vol. 40, Issues 4-6, pp. 455-469, 2005
Development education and engineering: a framework for incorporating reality of developing countries into engineering studies
A. Pérez-Foguet, S. Oliete-Josa, A. Saz-Carranza
International Journal of Sustainability in Higher Education, Vol. Vol. 6, Issue 3, pp. 278-303, 2005
Hysteretic modelling of x-braced shear walls
Pastor, N. and Rodríguez-Ferran, A.
Thin-Walled Structures, Vol. 43, Issue 10, pp. 1567-1588, 2005
2004
A comparison of two formulations to blend finite elements and mesh-free methodsHuerta, A., Fernández-Méndez. S. and Liu, W.K.
Computer Methods in Applied Mechanics and Engineering, Vol. 193, Issue 12-14, pp. 1105-1117, 2004
A model for the ultrasonic detection of surface-breacking craks by the Scanning Laser Source technique.
Arias, I., Achenbach, J. D.
Wave Motion, Vol. 40, Issue 1, pp. 61-75, 2004
Accurate upper and lower error bounds by solving flux-free local problems in "stars"
Díez, P., Parés, N. y Huerta, A.
Revue européenne des éléments finis, Vol. 13, Issue 5-6-7/2004, pp. 497-507, 2004
Arbitrary Lagrangian-Eulerian methods
Donea, J., Huerta, A., Ponthot, J.-Ph. and Rodríguez-Ferran, A.
The Encyclopedia of Computational Mechanics, Wiley, Vol. 1, Chapter 14, pp. 413-437, 2004
Benchmarks for the validation of a non local damage model
Ludovic Jason, Shahrokh Ghavamian, Gilles Pijaudier-Cabot, Antonio Huerta
Revue française de Génie civil, Vol. 8, Issue 2 -3, pp. 303-328, 2004
Computing bounds for linear functionals of exact weak solutions to Poisson's equation
A. M. Sauer-Budge, J. Bonet, A. Huerta, and J. Peraire
SIAM Journal on Numerical Analysis, Vol. 42, Issue 4, pp. 1610-1630, 2004
Convergence analysis of a subdomain iterative method for the finite element approximation of the coupling of Stokes and Darcy equations.
Discacciati, M. and Quarteroni, A.
Computing and Visualization in Science, Vol. 6, Num 2-3, pp. 93-103, 2004
Efficient and Reliable Nonlocal Damage Models
Rodríguez-Ferran, A., Morata, I. and Huerta, A.
Computer Methods in Applied Mechanics and Engineering, Vol. 193, Issues 30, 32, pp. 3431-3455, 2004
Finite crystal elasticity of carbon nantubes based on the exponential Cauchy-Born rule
Arroyo, M., Belytschko, T.
Physical Review B, Vol. 69, pp. 115415-0, 2004
Finite element analysis of the nonlinear mechanics of carbon nanotubes
Arroyo, M., Belytschko, T.
International Journal for Numerical Methods in Engineering, Vol. 59, Issue 3, pp. 419-456, 2004
Imposing essential boundary conditions in mesh-free methods
Fernández-Méndez, S. and Huerta, A.
Computer Methods in Applied Mechanics and Engineering, Vol. 193, Issues 12 -14, pp. 1257-1275, 2004
Meshfree Methods
Huerta, A., Belytschko, T. Fernández-Méndez, S. and Rabczuk, T.
Encyclopedia of Computational Mechanics, Vol. 1, Chapter 10, pp. 279-309, 2004
Numerical modelling of void inclusions in porous media
Rodríguez-Ferran, A., Sarrate, J. and Huerta, A.
International Journal for Numerical Methods in Engineering, Vol. 59, Issue 4, pp. 577-596, 2004
Pseudo-divergence-free element free Galerkin method for incompressible fluid flow
Huerta, A., Vidal, Y. and Villon, P.
Computer Methods in Applied Mechanics and Engineering, Vol. 193, Issue 12 - 14, pp. 1119-1136, 2004
Rayleigh wave correction for the BEM analysis of two-dimensional elastodynamic problems in a half-space
Arias, I., Achenbach, J.D.
International Journal for Numerical Methods in Engineering, Vol. 60, Issue 13, pp. 2131-2146, 2004
Sliding contact conditions using the master–slave approach with application on geometrically non-linear beams
Muñoz, J and Jelenic, G
International Journal of Solids and Structures, Vol. 41, pp. 6963-6992, 2004
Use of reciprocity considerations for the two-dimensional BEM analysis of wave propagation in an elastic half-space with applications to acoustic emission
Arias, I., Achenbach, J.D.
Wave Motion, Vol. 39, Issue 4, pp. 281-294, 2004
2003
A finite deformation membrane based on inter-atomic potentials for the transverse mechanics of nanotubesArroyo, M., Belytschko, T.
Mechanics of Materials, Vol. 35, Issues 3-6, pp. 193-215, 2003
A note on the convergence of the secant method for simple and multiple roots
Pedro Díez
Applied Mathematics Letters, Vol. 16, Issue 8, pp. 1211-1215, 2003
Convergence of finite elements enriched with meshless methods
Fernández-Méndez, S., Díez, P. and Huerta, A.
Numerische Mathematik, Vol. 96, Issue 1, pp. 43-59, 2003
Efficient and accurate approach for powder compaction problems
Pérez - Foguet, A., Rodríguez - Ferran, A. and Huerta, A.
Computational Mechanics, Vol. 30, Issue 3, pp. 220-234, 2003
Estudio numérico del control exacto desde el contorno de la ecuación Korteweg-de Vries lineal
Capella-Kort, A. and Sarrate, J.
Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 19, Issue 2, pp. 145-148, 2003
Goal-oriented adaptivity for shell structures: Error assessment and remeshig criteria
Díez, P., Morata, I. and Huerta A.
Revue européenne des éléments finis, Vol. 12, Issue 6, pp. 691-715, 2003
Locking in the incompressible limit: pseudo-divergence-free element free Galerkin
Yolanda Vidal, Pierre Villon and Antonio Huerta
Communications in Numerical Methods in Engineering, Vol. 19, Issue 9, pp. 725-735, 2003
Master-slave approach for the modelling of joints with dependent degrees of freedom in flexible mechanisms
Muñoz, J; Jelenic, G and Crisfield, MA
Communications in Numerical Methods in Engineering, Vol. 19, Issue 9, pp. 689-702, 2003
Nonlinear mechanical response and rippling of thick multi-walled carbon nanotubes
Arroyo, M., Belytschko,T.
Physical Review Letters, Vol. 91, Issue 21, pp. 215505-0, 2003
Numerical representation of the quality measures of triangles and triangular meshes
Sarrate, J., Palau, J., and Huerta, A.
Communications in Numerical Methods in Engineering, Vol. 19, Issue 7, pp. 551-561, 2003
Recovering lower bounds of the error by postprocessing implicit residual a posteriori error estimates
Díez, P., Parés; N. And Huerta,A.
International Journal for Numerical Methods in Engineering, Vol. 56, Issue 10, pp. 1465-1488, 2003
Thermoelastic generation of ultrasound by line-focused laser irradiation
Arias, I., Achenbach, J. D.
International Journal of Solids and Structures, Vol. 40, Issue 25, pp. 6917-6935, 2003
Time accurate consistently stabilized mesh-free methods for convection dominated problems
Huerta, A. and Fernández-Méndez, S.
International Journal for Numerical Methods in Engineering, Vol. 56, Issue 9, pp. 1225-1242, 2003
2002
An atomistic-based finite deformation membrane for single layer crystalline filmsArroyo, M., Belytschko, T.
Journal of the Mechanics and Physics of Solids, Vol. 50, Issue 9, pp. 1941-1977, 2002
Arbitrary Lagrangian-Eulerian (ALE) formulation for hyperelastoplasticity
Rodríguez-Ferran, A., Pérez-Foguet, A. and Huerta, A.
International Journal for Numerical Methods in Engineering, Vol. 53, Issue 8, pp. 1831-1851, 2002
Coupling finite elements and particles for adaptivity: an application to consistently stabilized convection-diffusion
Fernández-Méndez, S. and Huerta, A.
Lecture Notes on computational science and engineering, Vol. 26, pp. 117-130, 2002
Enrichissement des interpolations d'éléments finis en utilisant des méthodes de particules
Huerta, A., Fernández-Méndez, S. and Díez, P.
Mathematical Modeling and Numerical Analysis, Vol. 36, Issue 6, pp. 1027-1042, 2002
Error estimation and adaptivity for nonlinear FE analysis
Antonio Huerta, Antonio Rodríguez-Ferran and Pedro Díez
International Journal of Applied Mathematics and Computer Sciences, Vol. 12, Issue 1, pp. 59-70, 2002
Generación automática de malllas no estructuradas y formadas exclusivamente por cuadriláteros sobre superficies curvas en R3
Sarrate, J. and Huerta, A.
Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 18, Issue 1, pp. 79-93, 2002
Locking in the incompressible limit: pseudo-divergence-free element free Galerkin
Yolanda Vidal, Pierre Villon and Antonio Huerta
Revue européenne des éléments finis, Vol. 11, Issue 7-8, pp. 869-891, 2002
Mathematical and numerical models for coupling surface and groundwater flows.
Discacciati, M.; Miglio, E. and Quarteroni, A.
Applied Numerical Mathematics, Vol. 43, Iss. 1-2, pp. 57-74, 2002
On the formulation of closest-point projection algorithms in elastoplasticity. Part I: The variational structure
Armero, F. and Pérez-Foguet, A.
International Journal for Numerical Methods in Engineering, Vol. 53, Issue 2, pp. 297-329, 2002
On the Formulation of Closest-Point Projection Algorithms in Elastoplasticity. Part II: Globally Convergent Schemes. With applications to deviatoric and pressure-dependent plastic models.
Pérez-Foguet, A. and Armero, F.
International Journal for Numerical Methods in Engineering, Vol. 53, Issue 2, pp. 331-374, 2002
The efficient computation of bounds for functionals of finite element solutions in large strain elasticity
J. Bonet, A. Huerta and J. Peraire
Computer Methods in Applied Mechanics and Engineering, Vol. 191, Issue 43, pp. 4807-4826, 2002
Time-accurate solution of stabilized convection-diffusion-reaction equations: I. Time and space discretization
Antonio Huerta and Jean Donea
Communications in Numerical Methods in Engineering, Vol. 18, Issue 8, pp. 565-573, 2002
Time-accurate solution of stabilized convection-diffusion-reaction equations: II. Accuracy analysis and examples
Antonio Huerta, Bernardino Roig and Jean Donea
Communications in Numerical Methods in Engineering, Vol. 18, Issue 8, pp. 575-584, 2002
2001
A combined rh-adaptive scheme based on domain subdivision. Formulation and linear examples.Askes, H and Rodríguez-Ferran, A.
International Journal for Numerical Methods in Engineering, Vol. 51, Issue 3, pp. 253-273, 2001
Adaptive analysis based on error estimation for nonlocal damage models
Rodríguez-Ferran, A., Arbós, I, and Huerta, A.
European Journal of Finite Elements (Revue Européenne des éléments finis, Vol. 10 Issues 2, 3 & 4, pp. 193-207, 2001
An improved Algorithm to Smooth Graded Quadrilateral Meshes Preserving the Prescribed Element Size
Sarrate, J. and Huerta, A.
Communications in Numerical Methods in Engineering, Vol. 17, Issue 2, pp. 89-99, 2001
Arbitrary Lagrangian-Eulerian formulation for fluid-rigid body interaction
Sarrate, J., Huerta, A. and Donéa, J.
Computer Methods in Applied Mechanics and Engineering, Vol. 190, Issues 24, 25, pp. 3171-3188, 2001
Arbitrary Lagrangian-Eulerian Simulation of Powder Compaction Processes
Pérez-Foguet, A., Rodríguez-Ferran, A. and Huerta, A.
International Journal of Forming Processes, Vol. 4 Issues 3, 4, pp. 535-549, 2001
Consistent tangent matrices for density-dependent finite plasticity models
Pérez-Foguet, A., Rodríguez-Ferran, A. and Huerta, A.
International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 25, Issue 11, pp. 1045-1075, 2001
Consistent Tangent Matrices for Substepping Schemes
Pérez-Foguet, A., Rodríguez-Ferran, A. and Huerta, A.
Computer Methods in Applied Mechanics and Engineering, Vol. 190, Issues 35, 36, pp. 4627-4647, 2001
El Mètodo de los Elementos Finitos en problemas electromagnéticos: planteamiento y aplicaciones
Josep Sarrate y Ramon Clarisó
Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 17, Issue 1, pp. 219-248, 2001
Implementation of a stabilized finite element formulation for the incompressible Navier-Stokes equations based on a pressure gradient projection
Ramon Codina, Jordi Blasco, Gustavo C. Buscaglia and Antonio Huerta
International Journal for Numerical Methods in Fluids, Vol. 37, Issue 4, pp. 419-444, 2001
Locking in the incompressible limit for the Element Free Galerkin method
Huerta, A. and Fernández-Méndez, S.
International Journal for Numerical Methods in Engineering, Vol. 51, Issue 11, pp. 1361-1383, 2001
Probabilistic Analysis of an A Posteriori Error Estimator for Finite Elements
Pedro Díez and Juan José Egozcue
Mathematical Models and Methods in Applied Sciences, Vol. 11, Issue 5, pp. 841-854, 2001
2000
Adaptivity based on error estimation for viscoplastic softening materialsDíez, P., Arroyo, M. and Huerta, A.
Mechanics of Cohesive-Frictional Materials, Vol. 5, Issue 2, pp. 87-112, 2000
Efficient unstructured quadrilateral mesh generation
Sarrate, J. and Huerta, A.
International Journal for Numerical Methods in Engineering, Vol. 49, Issue 10, pp. 1327-1350, 2000
Enrichment and Coupling of the Finite Element and Meshless Methods
Huerta, A. and Fernández-Méndez, S.
International Journal for Numerical Methods in Engineering, Vol. 48, Issue 11, pp. 1615-1636, 2000
Error estimation and adaptivity for nonlocal damage models
Rodríguez-Ferran, A. and Huerta, A.
International Journal of Solids and Structures, Vol. 37, Issue 48-50, pp. 7501-7528, 2000
Error estimation for adaptive computations on shell structures
Huerta, A., and Díez, P.
Revue européenne des éléments finis, Vol. 9, Issue 1, 2 i 3,/2000, pp. 49-66, 2000
Error Estimation Including Pollution Assessment for Nonlinear Finite Element Analysis
Huerta, A. and Díez, P.
Computer Methods in Applied Mechanics and Engineering, Vol. 181, Issues 1,3, pp. 21-41, 2000
High-order accurate time-stepping schemes for convection-diffusion problems
Donéa, J., Roig, B. and Huerta, A.
Computer Methods in Applied Mechanics and Engineering, Vol. 182, Issues 3, 4, pp. 249-275, 2000
Numerical differentiation for local and global tangent operators in computational plasticity
Pérez-Foguet, A., Rodríguez-Ferran, A. and Huerta, A.
Computer Methods in Applied Mechanics and Engineering, Vol. 189, Issue 1, pp. 277-296, 2000
Numerical differentiation for non-trivial consistent tangent matrices: an application to the MRS-Lade model
Pérez-Foguet, A., Rodríguez-Ferran, A. and Huerta, A.
International Journal for Numerical Methods in Engineering, Vol. 48, Issue 2, pp. 159-184, 2000
1999
A unified approach to remeshing strategies for finite element h-adaptivityDíez, P. and Huerta, A.
Computer Methods in Applied Mechanics and Engineering, Vol. 176, Issues 1, 4, pp. 215-229, 1999
Accuracy of two stress update algorithms for shear-free large deformations paths
Rodríguez-Ferran, A. and Huerta, A.
ASCE Journal of Engineering Mechanics, Vol. 125, Issue 6, pp. 715-717, 1999
Adapting Broyden Method to Handle Linear Constraints Imposed via Lagrange Multipliers
Rodríguez-Ferran, A. and Huerta, A.
International Journal for Numerical Methods in Engineering, Vol. 46, Issue 12, pp. 2011-2026, 1999
Adaptive finite element strategies based on error assessment
Huerta, A., Rodríguez-Ferran, A., Díez, P.and Sarrate, J.
International Journal for Numerical Methods in Engineering, Vol. 46, Issue 10, pp. 1803-1818, 1999
Analysis of the vane test considering size and time effects
Pérez-Foguet, A., Ledesma, A. and Huerta, A.
International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 23, Issue 5, pp. 383-412, 1999
Finite Element Error Bounds for Nonlinear Outputs of the Helmholtz Equation
Sarrate, J., Peraire, J. and Patera
International Journal for Numerical Methods in Fluids, Vol. 31, Issue 1, pp. 17-36, 1999
Plastic flow potential for cone region on the MRS-Lade model
Pérez-Foguet, A. and Huerta, A.
ASCE Journal of Engineering Mechanics, Vol. 125, Issue 3, pp. 364-367, 1999
1998
A fractional-step method for the incomprensible Navier-Stokes equations related to a predictor-multicorrector algorithmBlasco, J., Codina, R. and Huerta, A.
International Journal for Numerical Methods in Fluids, Vol. 28, Issue 10, pp. 1391-1419, 1998
A posteriori error estimation for standard finite element analysis
Díez, P., Egozcue, J.J. and Huerta, A.
Computer Methods in Applied Mechanics and Engineering, Vol. 163, Issues 1,4, pp. 141-157, 1998
Adaptive analysis of yield line patterns in plates with the Arbitrary Lagrangian-Eulerian method
Askes, H., Rodríguez-Ferran, A. and Huerta, A.
Computers and Structures, Vol. 70, Issue 3, pp. 257-271, 1998
ALE Stress Update for Transient and Quasistatic Processes
Rodríguez-Ferran, A., Casadei, F. and Huerta, A.
International Journal for Numerical Methods in Engineering, Vol. 43, Issue 2, pp. 241-262, 1998
Comparing Two Algorithms to Add Large Strains to Small Strain Finite Element Code
Rodríguez-Ferran, A. and Huerta, A.
ASCE Journal of Engineering Mechanics, Vol. 124, Issue 9, pp. 939-948, 1998
Un estimador de error residual para el método de los elementos finitos
Díez, P., Egozcue, J.J. and Huerta, A.
Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 14, Issue 4, pp. 557-582, 1998
1997
A note on a numerical benchmark test: An axisymmetric shell under ring loadsVila, A., Rodríguez-Ferran, A. and Huerta, A.
Communications in Numerical Methods in Engineering, Vol. 13, Issue 3, pp. 181-192, 1997
Two Stress Update Algorithms for Large Strains: Accuracy Analysis and Numerical Implementation
Rodríguez-Ferran, A., Pegon, P. and Huerta, A.
International Journal for Numerical Methods in Engineering, Vol. 40, Issue 23, pp. 4363-4404, 1997
Vulnerabilidad sísmica y toma de decisiones
Egozcue, J.J., Simarro, G. and Díez, P.
Revista internacional de Cálculo de Estructuras, Vol. 2, pp. 35-58, 1997
1995
Arbitrary Lagrangian-Eulerian finite element analysis of strain localization in transient problemsPijaudier-Cabot, G., Bodé, L. and Huerta, A.
International Journal for Numerical Methods in Engineering, Vol. 38, pp. 4171-4191, 1995
La Programación orientada al objeto aplicada al cálculo por el método de los elementos finitos
Bretones, M.A., Rodríguez-Ferran, A. and Huerta, A.
Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 11, Issue 3, pp. 423-449, 1995
1994
Discretization Influence on the Regularization by two Localization LimitersHuerta, A. and Pijaudier-Cabot, G.
Journal of Engineering Mechanics, Vol. 120, Issue 6, pp. 1198-1218, 1994
New ALE Applications in Non-Linear Fast-Transient Solid Dynamics
Huerta, A. and Casadei, F.
Engineering Computations, Vol. 11, pp. 317-345, 1994
1993
Shallow structure of part of northwstern Iberia from short period Rayleigh wave observationsSarrate, J., Canas, J.A., Pujades, L., Badal, J., Corchete, V. and Payo, G.
Tectonophysics, Vol. 221, Issue 1, pp. 95-105, 1993
1992
Numerical Analysis of Nonlinear Large-Strain Consolidation and FillingHuerta, A. and Rodríguez-Ferran, A.
Computers and Structures, Vol. 44, Issue 5, pp. 905-919, 1992
1991
Finite Element Analysis of Bifurcation in Nonlocal Strain Softening SolidsPijaudier-Cabot, G. and Huerta, A.
Computer Methods in Applied Mechanics and Engineering, Vol. 90, Issues 1, 3, pp. 905-919, 1991
Particle injection in LSI+61º303 radio outburst
Paredes, J.M., Martí,J., Estalella, R and Sarrate, J.
Astronomy and Astrophisics, Vol. 248, pp. 124-128, 1991
1988
Permeability and Compressibility of Slurries from Seepage-Induced ConsolidationAntonio Huerta, Gregory A. Kriegsmann and Raymond J. Krizek
J. Geotechnical Engineering, ASCE, Vol. 115, pp. 615-627, 1988
Viscous Flow Structure Interaction
Huerta, A. and Liu, W.K.
Journal Pressure Vessel Technology, Vol. 110, Issue 1, pp. 15-21, 1988
Viscous flow with large free surface motion
Antonio Huerta and Win Kam Liu
Computer Methods in Applied Mechanics and Engineering, Vol. 69, Issue 3, pp. 277-324, 1988