Publications

2018

2017

An augmented Lagrangian formulation to impose boundary conditions for distortion based mesh moving and curving
Ruiz-Gironés, E.; Gargallo-Peiró, A.; Sarrate, J. and Roca X.
Procedia Engineering, Vol. 203, pp. 362-374, 2017

Arbitrary Lagrangian–Eulerian Methods
Donea, J., Huerta, A., Ponthot, J.-P., and Rodríguez-Ferran, A.
Encyclopedia of Computational Mechanics Second Edition, Vol. 1 Fundamentals, Chapter 10, pp. 1-23, 2017

Meshfree Methods
Huerta, A., Belytschko, T., Fernández-Méndez, S., Rabczuk, T., Zhuang, X., and Arroyo, M.
Encyclopedia of Computational Mechanics Second Edition, Vol. 2 Fundamentals, Chapter 3, pp. 1-38, 2017

Model Reduction Methods
Chinesta, F., Huerta, A., Rozza, G., and Willcox, K.
Encyclopedia of Computational Mechanics Second Edition, Vol. 1 Solids and Structures, Chapter 3, pp. 1-36, 2017

Generalized parametric solutions in Stokes flow
Díez, P., Zlotnik, S. and Huerta, A.
Computer Methods in Applied Mechanics and Engineering, Vol. 326, pp. 223-240, 2017

Ferroelectrics as smart mechanical materials
Cordero-Edwards, K.; Domingo, N.; Abdollahi, A.; Sort, J. and Catalan, G.
Advanced Materials, Vol. 29, pp. 1-6, 2017

R-adaptivity in limit analysis
Muñoz, J.; Hambleton, J. and Sloan, S.
Advances in direct methods for materials and structures, Vol. , pp. 73-84, 2017

Simulating Squeeze Flows in Multiaxial Laminates: Towards Fully 3D Mixed Formulations
Ibáñez, R., Abisset-Chavanne, E., Chinesta, F. and Huerta, A.
International Journal of Material Forming, Vol. 10, Issue 5, pp. 653-669, 2017

A semi-analytical scheme for highly oscillatory integrals over tetrahedra
Hospital-Bravo, R.; Sarrate, J. and Díez, P.
International Journal for Numerical Methods in Engineering, Vol. 111, Issue 8, pp. 703-723, 2017

Monitoring a PGD solver for parametric power flow problems with goal-oriented error assessment
García-Blanco, R.; Borzacchillelo, D.; Chinesta, F. and Díez, P.
International Journal for Numerical Methods in Engineering, Vol. 111, Issue 6, pp. 529-552, 2017

eXtended Hybridizable Discontinuous Galerkin with Heaviside enrichment for heat bimaterial problems
Gürkan, C.; Kronbichler, M.; Fernández-Méndez, S.
Journal of Scientific Computing, Vol. 72, Issue 2, pp. 542-567, 2017

Flight and passenger delay assignment optimization strategies
Montlaur, A.; Delgado, L.
Transportation Research Part C: Emerging Technologies, Vol. 81, pp. 99-117, 2017

Catalogue of vibration reduction index formulas for heavy junctions based on numerical simulations
Poblet-Puig, J., Guigou-Carter, C.
Acta Acustica United with Acustica, Vol. 103, Issue 4, pp. 624-638, 2017

The main factors and rules of stress shadow of perpendicular cracks
Wang, D., Zhou, F., Ge, H., Zlotnik, S., Yang, X., Peng, J.
Journal of Shenzhen University Science and Engineering, Vol. 34, Issue 4, pp. 331-440, 2017

Enhanced goal-oriented error assessment and computational strategies in adaptive reduced basis solver for stochastic problems
Serafin, K.; Magnain, B.; Florentin, E.; Parés, N. and Díez, P.
International Journal for Numerical Methods in Engineering, Vol. 110, Issue 5, pp. 440-466, 2017

Numerical Study and Experimental Comparison of Two-Phase Flow Generation in a T-Junction
Arias, S.; Montlaur, A.
AIAA Journal, Vol. 55 (5), pp. 1565-1574, 2017

Certified Descent Algorithm for shape optimization driven by fully-computable a posteriori error estimators
Giacomini, M.; Pantz, O. and Trabelsi, K.
ESAIM: Control, Optimisation and Calculus of Variations (ESAIM: COCV), Vol. 23, Issue 3, pp. 977-1001, 2017

Mechanics Reveals the Biological Trigger in Wrinkly Fingers
Sáez, P.; Zöllner, A. M.
Annals of biomedical engineering, Vol. 45, pp. 1039-1047, 2017

Proper Generalized Decomposition solution of the parameterized Helmholtz problem: application to inverse geophysical problems.
Signorini, M., Zlotnik, S. and Díez, P.
International Journal for Numerical Methods in Engineering, Vol. 109, Issue 8, pp. 1085-1102, 2017

The solution of linear mechanical systems in terms of path superposition
Magrans, F.X.; Poblet-Puig, J. and Rodríguez-Ferran, A.
Mechanical Systems and Signal Processing, Vol. 85, pp. 111-125, 2017

Hydraulic fracturing in cells and tissues: fracking meets cell biology
Arroyo, M. and Trepat, X.
Current Opinion in Cell Biology, Vol. 44, pp. 1-6, 2017

Preface
Font-Llagunes, J.M.; Muñoz, J.J.; Ambrósio, J.A.C.
Multibody System Dynamics, Vol. 39, pp. 1-2, 2017

Arterial Wall Stiffness and Atherogenesis in Human Coronaries
Ohayon, J., Yazdani, S.K., Malvè, M., Gharib, A.M., Heroux, J., García, A., Finet, G. and Pettigrew, R.I.
Biomechanics of Living Organs, Vol. 1, pp. 193-213, 2017

eXtended Hybridizable Discontinous Galerkin (X-HDG) for void problems
Gürkan, C.; Sala-Lardies, E.; Kronbichler, M.; Fernández-Méndez, S.
Journal of Scientific Computing, Vol. 66, Issue 3, pp. 1313-1333, 2017

A new equilibrated residual method improving accuracy and efficiency of flux-free error estimates
N. Parés, N. and Díez, P.
Computer Methods in Applied Mechanics and Engineering, Vol. 313, Issue 1, pp. 785-816, 2017

2016

Shape Transformations of Lipid Bilayers Following Rapid Cholesterol Uptake
Mohammad Rahimi, David Regan, Marino Arroyo, Anand Bala Subramaniam, Howard A. Stone and Margarita Staykova
Biophysical Journal, Vol. 111, pp. 2651-2657, 2016

Mathematical modeling and numerical simulation of a bioreactor landfill using Feel++
Dollé, G.; Duran, O.; Feyeux, N.; Frénod, E.; Giacomini, M.; Prud'homme, C.
ESAIM: Proceedings and Surveys, Vol. 55, pp. 83-110, 2016

Fourth order phase-field model for local max-ent approximants applied to crack propagation
Amiri, F.; Millán, D.; Arroyo, M.; Silani, M.; Rabczuk, T.
Computer Methods in Applied Mechanics and Engineering, Vol. 312, pp. 254-275, 2016

Regression curves for vibration transmission across junctions of heavyweight walls and floors based on finite element methods and wave theory
Hopkins, C.; Crispin. C.; Poblet-Puig, J. and Guigou-Carter, C.
Applied Acoustics, Vol. 113, pp. 7-21, 2016

Coexistence of wrinkles and blisters in supported graphene
Zhang, K. and Arroyo, M.
Extreme Mechanics Letters, Vol. 14, pp. 23-30, 2016

Vademecum-based GFEM (V-GFEM): Optimal Enrichment for transient problems
Canales, D., Leygue, A., Chinesta, F., González, D., Cueto, E., Feulvarch, E., Bergheau, J.M., and Huerta, A.
International Journal for Numerical Methods in Engineering, Vol. 108, Issue 9, pp. 971-989, 2016

A modal-spectral model for flanking transmissions
Poblet-Puig, J.
Journal of Sound and Vibration, Vol. 382, pp. 238-257, 2016

Charting molecular free-energy landscapes with an atlas of collective variables
Hashemian, B.; Millán, D and Arroyo, M.
The Journal of Chemical Physics, Vol. 145, Article number: 174109, 2016

Real-time simulation techniques for augmented learning in science and engineering
Quesada, C.; González, D.; Alfaro, I.; Cueto, E.; Huerta, A.; and Chinesta, F.
The Visual Computer, Vol. 32, Issue 11, pp. 1465-1479, 2016

eXtended Hybridizable Discontinuous Galerkin (X-HDG) for Void and Bimaterial Problems
Gürkan, C.; Sala-Lardies, E.; Kronbichler, M.; Fernández-Méndez, S.
Advances in Discretization Methods, Vol. , pp. 103-122, 2016

Bulging Brains
Weickenmeier, J.; Saez, P.; Butler, C. A. M. ; Young P. G.; Gorily, A.; Kuhl, E.
Journal of Elasticity, Vol. , pp. 1-16, 2016

Elliptic Harbor Wave Model with Perfectly Matched Layer and Exterior Bathymetry Effects
Modesto, D., Fernández-Méndez, S., and Huerta, A.
Journal of Waterway, Port, Coastal, and Ocean Engineering, Vol. 142, Issue 5, Article number: 4016008, 2016

Collective cell durotaxis emerges from long-range intercellular force transmission
Sunyer, R.; Conte V.; Escribano, J.; Elosegui-Artola, A.; Labernadie A.; Valon L.; Navajas D.; García-Aznar J. M.; Muñoz, J.J.; Roca-Cusachs P; Trepat, X.
Science, Vol. 353, pp. 1157-1161, 2016

Towards the modelling of ageing and atherosclerosis effects in ApoE-/- mice aortic tissue
Waffenschmidt, T.; Cilla, M.; Saez, P.; Perez, M.M.; Martinez, M.A.; Menzel, A.;Peña, E.
Journal of Biomechanics, Vol. 49, Issue 12, pp. 2390-2397, 2016

Geometric derivation of the microscopic stress: A covariant central force decomposition
Torres-Sánchez, A.; Vanegas, J. M.; and Arroyo, M.
Journal of the Mechanics and Physics of Solids, Vol. 96, pp. 224-239, 2016

A reduced order modeling approach for optimal allocation of Distributed Generation in power distribution systems
García-Blanco, R.; Díez, P.; Borzacchiello, D. and Chinesta, F.
2016 IEEE International Energy Conference (ENERGYCON), Vol. , pp. 1-6, 2016

Space-time NURBS-enhanced finite elements for free-surface flows in 2D
Stavrev, A., Knechtges, P., Elgeti, S., and Huerta A.
International Journal for Numerical Methods in Fluids, Vol. 81, Issue 7, pp. 426-450, 2016

A distortion measure to validate and generate curved high-order meshes on CAD surfaces with independence of parameterization
Gargallo-Peiró, A.; Roca, X.; Peraire, J. and Sarrate, J.
International Journal for Numerical Methods in Engineering, Vol. 106, Issue 13, pp. 1100-1130, 2016

Unified formulation of a family of iterative solvers for power system analysis
Borzacchiello, D.; Chinesta, F.; Malik, M. H.; García-Blanco, R.; Diez, P.
Electric Power Systems Research, Vol. 140, pp. 201-208, 2016

Sticking and sliding of lipid bilayers on deformable substrates
Stubbington, L.; Arroyo, M.; Staykova, M.
Soft Matter, Vol. , Article number: , 2016

Non-regularised Inverse Finite Element Analysis for 3D Traction Force Microscopy
Muñoz, J.J.
International Journal of Numerical Analysis and Modeling, Vol. 13, Issue 5, pp. 763-781, 2016

Tutorial on Hybridizable Discontinuous Galerkin (HDG) for Second-Order Elliptic Problems
Sevilla, R. and Huerta. A.
Advanced Finite Element Technologies, Springer International Publishing, Vol. 566, pp. 105-129, 2016

Optimal grasping points identification for a rotational four-fingered aerogripper
Vazquez, J.; Giacomini, M.; Escareno, J.; Rubio, E.; Sossa, H.
RED-UAS 2015, 2015 Workshop on Research, Education and Development of Unmanned Aerial Systems, Vol. IEEE, pp. 272-277, 2016

Microstructural quantification of collagen fiber orientations and its integration in constitutive modeling of the porcine carotid artery
Saez, P.; Garcia, A.; Peña, E.; Gasser, C.; Martinez, M.A.
Acta Biomaterialia, Vol. 33, pp. 183-193, 2016

A flexoelectric microelectromechanical system on silicon
Bhaskar, U. K.; Banerjee, N.; Abdollahi, A.; Wang, Z.; Schlom, D. G.; Rijnders, G.; Catalan, G.
Nature Nanotechnology, Vol. 11, pp. 263-266, 2016

High-order mesh curving by distortion minimization with boundary nodes free to slide on a 3D CAD representation
Ruiz-Gironés, E.; Roca X.; Sarrate, J.
Computer-Aided Design, Vol. 72, pp. 52-64, 2016

Numerical modeling of undersea acoustics using a partition of unity method with plane waves enrichment
Hospital-Bravo, R.; Sarrate, J. and Díez, P.
Computational Mechanics, Vol. 57, Issue 5, pp. 717-732, 2016

Adaptividade e Estimativas de Erro Orientadas por Metas Aplicadas a um Benchmark Test de Propagação de Onda
Steffens, L.M.; Díez, P.; Parés, N. and Alves, M.K.
Tendências em Matemática Aplicada e Computacional, Vol. 17, Issue 1, pp. 35-53, 2016

Porous-based rheological model for tissue fluidisation
Asadipour, N.; Trepat, X.; Munoz, J.J
Journal of the Mechanics and Physics of Solids, Vol. 96, pp. 535-549, 2016

Generation of curved high-order meshes with optimal quality and geometric accuracy
Ruiz-Gironés, E.; Sarrate, J. and Roca X.
Procedia Engineering, Vol. 163, pp. 315-327, 2016

Flexoelectric MEMS: towards an electromechanical strain diode
Bhaskar, U. K.; Banerjee, N.; Abdollahi, A.; Solanas, E.; D. G.; Rijnders, G.; Catalan, G.
Nanoscale, Vol. 8, Issue 3, pp. 1293-1298, 2016

Modeling of the mechano-chemical behaviour of the Nuclear Pore Complex: Current research and perspective
García A, Matas JF and Raimondi M.T.
Integrative Biology, Vol. 11, pp. 1011-1021, 2016

2015

Computational modeling of acute myocardial infarction
Saez, P.; Kuhl, E.
Computer Methods in Biomechanics and Biomedical Engineering, Vol. 19, pp. 1107-1115, 2015

Cell-centred model for the simulation of curved cellular monolayers
Mosaffa, P.; Asadipour, N.; Millán, D.; Rodríguez-Ferran, A.; Muñoz, J.J.
Computational Particle Mechanics, Vol. 2 (4), pp. 359-370, 2015

Using spectral finite elements for parametric analysis of the vibration reduction index of heavy junctions oriented to flanking transmissions and EN-12354 prediction method
Poblet-Puig, J.; Guigou-Carter, C.
Applied Acoustics, Vol. 99, pp. 8-23, 2015

AAR-based decomposition method for lower bound limit analysis
Muñoz, J.J.; Rabiei, N.
Engineering and Computational Mechanics , Vol. 168 (4), pp. 169-177, 2015

An error estimator for real-time simulators based on model order reduction
Alfaro, I.; González, D.; Zlotnik, S.; Díez, P.; Cueto, E. and Chinesta, F.
Advanced Modeling and Simulation in Engineering Sciences, Vol. 2, Issue 1, pp. 1-30, 2015

Effect of the separated approximation of input data in the accuracy of the resulting PGD solution
Zlotnik, S.; Díez, P.; González, D,; Cueto, E. and Huerta, A.
Advanced Modeling and Simulation in Engineering Sciences, Vol. 2, Article number: 28, 2015

An a posteriori error estimator for shape optimization: application to EIT
Giacomini, M.; Pantz, O.; Trabelsi, K.
Journal of Physics: Conference Series, Vol. 657, Article number: 12004, 2015

Un estimador de error residual semiexplícito en cantidades de interés para un problema mecánico lineal
Rosales, R. and Díez, P.
Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 32, Issue 4, pp. 212-220, 2015

Real time parameter identification and solution reconstruction from experimental data using the Proper Generalized Decomposition
Nadal, E., Chinesta, F., Díez, P., Fuenmayor, FJ. and Denia, FD
Computer Methods in Applied Mechanics and Engineering, Vol. 296, Issue 1, pp. 113-128, 2015

Hydraulic fracture and toughening of a brittle layer bonded to a hydrogel
Lucantonio, A.; Noselli, G.; Trepat, X.; DeSimone, A.; Arroyo, M.
Physical Review Letters, Vol. 115, Article number: 188105, 2015

An efficient and general approach for implementing thermodynamic phase equilibria information in geophysical and geodynamic studies
Afonso, JC, Zlotnik, S. and Díez, P.
Geochemistry, Geophysics, Geosystems, Vol. 16, Issue 10, pp. 3767-3777, 2015

Proper Generalized Decomposition for parameterized Helmholtz problems in heterogeneous and unbounded domains: application to harbor agitation
Modesto, D., Zlotnik, S. and Huerta, A.
Computer Methods in Applied Mechanics and Engineering, Vol. 295, pp. 127-149, 2015

Fast r-adaptivity for multiple queries of heterogeneous stochastic material fields
Cottereau, R. and Díez, P.
Computational Mechanics, Vol. 56, Issue 4, pp. 601-612, 2015

Fracture toughening and toughness asymmetry induced by flexoelectricity
Abdollahi, A.; Peco, C.; Millán, D.; Arroyo, M.; Catalan, G.; Arias, I.
Physical Review B, Vol. 92, Article number: 94101, 2015

Proper Generalized Decomposition of a geometrically parametrized heat problem with geophysical applications
S. Zlotnik, P. Díez, D. Modesto and A. Huerta
International Journal for Numerical Methods in Engineering, Vol. 103, Issue 10, pp. 737-758, 2015

A theoretical model of the endothelial cell morphology due to different waveforms
Saez, P.; Malve, M.; Martinez, M.A.
Journal of Theoretical Biology, Vol. 379, pp. 16-23, 2015

Optimization of a regularized distortion measure to generate curved high-order unstructured tetrahedral meshes
Gargallo-Peiró, A.; Roca, X.; Peraire, J. and Sarrate, J.
International Journal for Numerical Methods in Engineering, Vol. 103, Issue 5, pp. 342-363, 2015

Constructive and Destructive Interplay between Piezoelectricity and Flexoelectricity in Flexural Sensors and Actuators
Abdollahi, A. ; Arias, I.
Journal of Applied Mechanics, Vol. 82 (12), Article number: 121003, 2015

Size-preserving size functions and smoothing procedures for adaptive quadrilateral mesh generation
Ruiz-Gironés, E.; Roca, X. and Sarrate, J.
Engineering with Computers, Vol. 31, Issue 3, pp. 483-498, 2015

Distortion and quality measures for validating and generating high-order tetrahedral meshes
Gargallo-Peiró, A.; Roca, X.; Peraire, J. and Sarrate, J.
Engineering with Computers, Vol. 31, Issue , pp. 423-437, 2015

Examining the mechanical equilibrium of microscopic stresses in molecular simulations
Torres-Sánchez, A.; Vanegas, J. M.; Arroyo, M.
Physical Review Letters, Vol. 114, Article number: 258102, 2015

Physical principles of membrane remodelling during cell mechanoadaptation
Kosmalska, A.J.; Casares, L.; Elosegui-Artola, A.; Thottacherry, J.J.; Moreno-Vicente, R.; del Pozo, M.A.; Mayor, S.; Arroyo, M.; Navajas, D.; Trepat, X.; Gauthier, N.C.; Roca-Cusachs, P.
Nature Communications, Vol. 6, Article number: 7292, 2015

Defining an L2-disparity Measure to Check and Improve the Geometric Accuracy of Non-interpolating Curved High-order Meshes
Ruiz-Gironés, E.; Sarrate, J. and Roca X.
Procedia Engineering, Vol. 124, pp. 122-134, 2015

Numerical Study of 2D Vertical Axis Wind and Tidal Turbines with a Degree-Adaptive Hybridizable Discontinuous Galerkin Method
Montlaur, A.; Giorgiani, G.
CFD for Wind and Tidal Offshore Turbines,, Vol. , pp. 13-26, 2015

Phase-field modeling and simulation of fracture in brittle materials with strongly anisotropic surface energy
Li, B.; Peco, C.; Millán, D.; Arias, I. and Arroyo, M.
International Journal for Numerical Methods in Engineering, Vol. 102 (3-4), pp. 711-727, 2015

Real-time monitoring of thermal processes by reduced order modeling
J.V. Aguado, A. Huerta, F. Chinesta and E. Cueto
International Journal for Numerical Methods in Engineering, Vol. 102, Issue 5, pp. 991-1017, 2015

AAR-based decomposition algorithm for non-linear convex optimisation
Rabiei, N.; Muñoz, J. J.
Computational Optimization and Applications, Vol. 62 (3), pp. 761-786, 2015

A recovery-explicit error estimator in energy norm for linear elasticity
E. Nadal, P. Díez, J.J. Ródenas, M. Tur and F.J. Fuenmayor
Computer Methods in Applied Mechanics and Engineering, Vol. 287, pp. 172-190, 2015

Phase-field modeling of fracture in ferroelectric materials
Abdollahi, A. and Arias, I.
Archives of Computational Methods in Engineering, Vol. 22, Issue 2, pp. 153-181, 2015

Efficient implementation of Galerkin meshfree methods for large-scale problems with an emphasis on maximum entropy approximants
Peco, C.; Millán, D.; Rosolen, A.; Arroyo, M.
Computers and Structures, Vol. 150, pp. 52-62, 2015

Control of cell-cell forces and collective cell dynamics by the intercellular adhesome
Bazellières, E.; Conte, V.; Elosegui-Artola, A.; Serra-Picamal, X.; Bintanel-Morcillo, M.; Roca-Cusachs, P.; Muñoz, J. J.; Sales-Pardo, M.; Guimerà, R.; Trepat X.
Nature Cell Biology, Vol. 17, pp. 409-420, 2015

Revisiting pyramid compression to quantify flexoelectricity: A three-dimensional simulation study
Abdollahi, A. ; Millán, D. ; Peco, C. ; Arroyo, M.; Arias, I.
Physical Review B, Vol. 91, Article number: 104103, 2015

The effects of element shape on the critical time step in explicit time integrators for elasto-dynamics
Askes, H.; Rodríguez-Ferran, A.; Hetherington, J.
International Journal for Numerical Methods in Engineering, Vol. 101, Issue 11, pp. 809-824, 2015

Automatic subsystem identification in statistical energy analysis
Díaz-Cereceda, C.; Poblet-Puig, J.; Rodríguez-Ferran, A.
Mechanical Systems and Signal Processing, Vol. 54, pp. 182-194, 2015

A Lagrangian-Eulerian Finite Element algorithm for advection-diffusion-reaction problems with phase change
Oliveira, B. ; Afonso, J. C.; Zlotnik S.
Computer Methods in Applied Mechanics and Engineering, Vol. 300, pp. 375-401, 2015

A medial-axis-based model for propagating cracks in a regularised bulk
Tamayo-Mas, E.; Rodríguez-Ferran, A.
International Journal for Numerical Methods in Engineering, Vol. 101, Issue 7, pp. 489-520, 2015

Hydraulic fracture during epithelial stretching
Casares, L. ; Vincent, R. ; Zalvidea, D. ; Campillo, N.; Navajas, D. ; Arroyo, M. ; Trepat, X.
Nature Materials, Vol. 14, pp. 343-351, 2015

Computational model of collagen turnover in carotid arteries during hypertension
Saez, P; Peña, E.; Tarbell, J.M.; Martinez, M.A.
International Journal for Numerical Methods in Biomedical Engineering, Vol. 31, Issue 2, Article number: 2705, 2015

Simultaneous untangling and smoothing of quadrilateral and hexahedral meshes using an object-oriented framework
Ruiz-Gironés, E.; Roca, X.; Sarrate, J.; Montenegro, R. and Escobar, J. M.
Advances in Engineering Software, Vol. 80, pp. 12-24, 2015

Cell-based maximum entropy approximants
Millán, D. ; Sukumar N. ; and Arroyo, M.
Computer Methods in Applied Mechanics and Engineering, Vol. 284, pp. 712-731, 2015

Topological obstructions in the way of data-driven collective variables
Hashemian, B. ; and Arroyo, M.
The Journal of Chemical Physics, Vol. 142, Article number: 44102, 2015

On the Theories and Numerics of Continuum Models for Adaptation Processes in Biological Tissues
Saez, P.
Archives of Computational Methods in Engineering, Vol. 23, pp. 301-322, 2015

Computing the volume enclosed by a periodic surface and its variation to model a follower pressure
Rahimi, M.; Zhang, K.; Arroyo, M.
Computational Mechanics, Vol. 55 (3), pp. 519-525, 2015

Mapping forces and kinematics during collective cell migration
Serra-Picamal, X.; Conte, V.; Sunyer, R.; Muñoz, J.J.; Trepat, X.
Methods in Cell Biology, Vol. 125, pp. 309-330, 2015

Suppression of spurious frequencies in scattering problems by means of boundary algebraic and combined field equations
Poblet-Puig, J; Valyaev, V.Yu; Shanin, A.V.
Journal of Integral Equations and Applications, Vol. 27, 2, pp. 233-274, 2015

2014

Analysis of the discontinuous Galerkin Interior Penalty Method with solenoidal approximations for the Stokes equations
Montlaur, A. and Fernández-Méndez, S.
International Journal of Numerical Analysis and Modeling, Vol. 11, Issue 4, pp. 715-725, 2014

Understanding and strain-engineering wrinkle networks in supported graphene through simulations
Zhang, K. and Arroyo, M.
Journal of the Mechanics and Physics of Solids, Vol. 72, pp. 61-74, 2014

Force Transduction and Lipid Binding in MscL: A Continuum-molecular Approach
Vanegas, J. M. ; and Arroyo, M.
Plos ONE, Vol. 9 (12), Article number: , 2014

Computational evaluation of the flexoelectric effect in dielectric solids
Abdollahi, A.; Peco, C.; Millán, D.; Arroyo M.; and Arias I.
Journal of Applied Physics, Vol. 116, Issue 9, Article number: 93502, 2014

Interplay of packing and flip-flop in local bilayer deformation. How phosphatidylglycerol could rescue mitochondrial function in a cardiolipin- deficient yeast mutant
Khalifat, N; Rahimi, M.; Bitbol, A-F; Seigneuret, M.; Fournier, J.-B.; Puff, N.; Arroyo, M.; and Angelova, M.
Biophysical Journal, Vol. 107, Issue 4, pp. 879-890, 2014

Forces driving epithelial wound healing
Brugués, A.; Anon, E.; Conte, V.; Veldhuis, J.H.; Gupta, M.; Colombelli, J.; Muñoz, J.J.; Brodland, G.W.; Ladoux, B.; and Trepat, X.
Nature Physics, Vol. 10, Issue 9, pp. 683-690, 2014

Optimizing Mesh Distortion by Hierarchical Iteration Relocation of the Nodes on the CAD Entities
Ruiz-Gironés, E.; Roca, X.; and Sarrate, J.
Procedia Engineering, Vol. 82, pp. 101-113, 2014

Hybridizable Discontinuous Galerkin with degree adaptivity for the incompressible Navier-Stokes equations
Giorgiani G., Fernández-Méndez S., Huerta A.
Computers and Fluids, Vol. 98, pp. 196-208, 2014

A Structural Approach Including the Behavior of Collagen Cross-Links to Model Patient-Specific Human Carotid Arteries
Saez, P.; Peña, E.; Martinez, M.A.
Annals of biomedical engineering, Vol. 42, Issue 6, pp. 1158-1169, 2014

A surface mesh smoothing and untangling method independent of the CAD parameterization
Gargallo-Peiró, A.; Roca, X. and Sarrate, J.
Computational Mechanics, Vol. 53, Issue 4, pp. 587-609, 2014

Boundary element method based on preliminary discretization
Poblet-Puig, J; Valyaev, V.Yu; Shanin, A.V.
Mathematical Models and Computer Simulations, Vol. 6, pp. 172-182, 2014

Goal-oriented space-time adaptivity for transient dynamics using a modal description of the adjoint solution
Verdugo, F.; Parés, N.; and Díez, P.
Computational Mechanics, Vol. 54, Issue 2, pp. 331-352, 2014

Three-dimensional simulation of crack propagation in ferroelectric polycrystals: effect of combined toughening mechanisms
Abdollahi, A. and Arias, I.
Acta Materiala, Vol. 65, pp. 106-117, 2014

A new continuous-discontinuous damage model: cohesive cracks via an accurate energy-transfer process
Tamayo-Mas, E. and Rodríguez-Ferran, A.
Theoretical and Applied Fracture Mechanics, Vol. 69, pp. 90-101, 2014

Phase-field modeling of fracture in linear thin shells
Amiri, F.; Millán, D.; Shen, Y.; Rabczuk, T.; and Arroyo, M.
Theoretical and Applied Fracture Mechanics, Vol. 69, pp. 102-109, 2014

Coupled mantle dripping and lateral dragging controlling the lithosphere structure of the NW-Moroccan margin and the Atlas Mountains: A numerical experiment
Zlotnik, S.; Jiménez-Munt, I; and Fernández, M.
Lithos, Vol. 189, pp. 16-27, 2014

Error assessment in structural transient dynamics
Verdugo, F.; Parés, N.; and Díez, P.
Archives of Computational Methods in Engineering, Vol. 21, Issue 1, pp. 59-90, 2014

On the natural stabilization of convection dominated problems using high order Bubnov-Galerkin finite elements
Cai, Q.; Kollmannsberger, S.; Sala-Lardies, E.; Huerta, A. and Rank, E.
Computers and Mathematics with Applications, Vol. 66, Issue 12, pp. 2545-2558, 2014

Importance of force decomposition for local stress calculations in biomembrane molecular simulations
Vanegas, J.M.;Torres-Sánchez, A.; and Arroyo, M.
Journal of Chemical Theory and Computation, Vol. 10, pp. 691-702, 2014

Impedance-based outflow boundary conditions for human carotid haemodynamics
Malvè, M., Chandra, S., García, A., Mena, A., Martínez, M. A., Finol, E. A. & Doblaré, M.
Computer Methods in Biomechanics and Biomedical Engineering, Vol. 17, Issue 11, pp. 1248-1260, 2014

Esquema adaptativo para problemas tridimensionales de convección-difusión
Monforte, L. and Pérez-Foguet, A.
Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 30, Number: 1, pp. 60-67, 2014

Nonsingular Isogeometric Boundary Element Method for Stokes Flows in 3D
Heltai, L.; Arroyo, M. and DeSimone, A.
Computer Methods in Applied Mechanics and Engineering, Vol. 268, pp. 514-539, 2014

Parametric solutions involving geometry: a step towards efficient shape optimization
Ammar, A.; Huerta, A.; Chinesta, F. ; Cueto, E. and Leygue, A.
Computer Methods in Applied Mechanics and Engineering, Vol. 268, pp. 178-193, 2014

Shape control of active surfaces inspired by the movement of euglenoids
Arroyo, M. and DeSimone, A.
Journal of the Mechanics and Physics of Solids, Vol. 62, pp. 99-112, 2014

XLME interpolants, a seamless bridge between XFEM and enriched meshless methods
Amiri, F.; Anitescu, C.; Arroyo, M.; Bordas, S.P.A.; and Rabczuk, T.
Computational Mechanics, Vol. 53, Issue 1, pp. 45-57, 2014

Assessment of water resources management in the Ethiopian Central Rift Valley: environmental conservation and poverty reduction
Pascual-Ferrer, J., Pérez-Foguet, A., Codony, J., Raventós, E., Candela, L.
International Journal of Water Resources Development, Vol. 34, pp. 1741-1759, 2014

Characterization of local wind patterns in complex mountain valleys
Pérez-Foguet, A.
International Journal of Climatology, Vol. 34, Number = 6, pp. 1741-1759, 2014

Impacts on effluent contaminants from mine sites: Risk assessment, fate, and distribution of pollution at basin scale
Yacoub, C., Pérez-Foguet, A., Valderrama, C., and Miralles, N.
Environmental Science and Pollution Research, Vol. 21, Number: 9, pp. 5960-5971, 2014

A multimesh adaptive scheme for air quality modeling with the finite element method
Monforte, L. and Pérez-Foguet, A.
International Journal for Numerical Methods in Fluids, Vol. 74, Number: 6, pp. 387-405, 2014

Water-sanitation-hygiene mapping: An improved approach for data collection at local level
Giné. R., Jiménez, A., and Pérez-Foguet, A.
Science of The Total Environment, Vol. 463-464, pp. 700-711, 2014

Unstructured and Semi-Structured Hexahedral Mesh Generation Methods
Sarrate, J; Ruiz-Gironés, E; and Roca, X.
Computational Technology Reviews, Vol. 10, pp. 35-64, 2014

2013

2012

Phase-field Modeling of Crack Propagation in Piezoelectric and Ferroelectric Materials with Different Electromechanical Crack Conditions
Abdollahi, A. and Arias, I.
Journal of the Mechanics and Physics of Solids, Vol. 60, Issue 12, pp. 2100-2126, 2012

Un método de captura de choques basado en las funciones de forma para Galerkin discontinuo de alto orden
Casoni, E.; Peraire, J., and Huerta, A.
Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 28, Issue 4, pp. 204-213, 2012

Mathematical modeling of collagen turnover in biological tissue
Sáez, P.; Peña, E.; Martínez, MÁ. and Kuhl, E.
Journal of Mathematical Biology, Vol. 67, Issue 6, pp. 1765-1793, 2012

Estimation of crack opening from a two-dimensional continuum-based finite element computation
Dufour, F.; Legrain, G.; Pijaudier-Cabot, G. and Huerta, A.
International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 36, Iss. 16, pp. 1813-1830, 2012

Enforcing interface flux continuity in enhanced XFEM: stability analysis
Díez, P.; Zlotnik, S. and Cottereau, R.
Oberwolfach Reports, Vol. 9, Num: 1, pp. 523-526, 2012

Are High-order and Hybridizable Discontinuous Galerkin methods competitive?
Huerta, A.; Roca, X.; Aleksandar, A. and Peraire, J.
Oberwolfach Reports, Vol. 9, Number: 1, pp. 485-487, 2012

The finite layer method for modelling the sound transmission through double walls
Díaz-Cereceda, C.; Poblet-Puig, J. and Rodríguez-Ferran, A.
Journal of Sound and Vibration, Vol. 331, Iss. 2, pp. 4884-4900, 2012

High-order implicit time integration for unsteady incompressible flows
Montlaur, A.; Fernández-Méndez, S. and Huerta, A.
International Journal for Numerical Methods in Fluids, Vol. 70, Issue 5, pp. 603-626, 2012

Reverse engineering the euglenoid movement
Arroyo, M.; Heltai, L.; Millán, D. and DeSimone, A.
Proceedings of the National Academy of Science USA, Vol. 109, pp. 17874-17879, 2012

Formation of tip-vortices on triangular prismatic-shaped cliffs. Part 1: A wind tunnel study
Cochard, S.; Letchford, C. W.; Earl, T. A. and Montlaur A.
Journal of Wind Engineering & Industrial Aerodynamics, Vol. 109, pp. 9-20, 2012

Formation of tip-vortices on triangular prismatic-shaped cliffs. Part 2: A computational fluid dynamics study
Montlaur A.; Cochard, S. and Fletcher, D.F.
Journal of Wind Engineering & Industrial Aerodynamics, Vol. 109, pp. 21-30, 2012

Crack initiation patterns at electrode edges in multilayer ferroelectric actuators
Abdollahi, A. and Arias, I.
Smart Materials and Structures, Vol. 21, Num. 9, pp. 1-11, 2012

A note on upper bound formulations in limit analysis
Muñoz, J. J.; Huerta, A.; Bonet, J. and J. Peraire
International Journal for Numerical Methods in Engineering, Vol. 91, Iss. 8, pp. 896-908, 2012

A simple shock-capturing technique for high-order discontinuous Galerkin methods
Huerta, A.; Casoni, E. and Peraire, J.
International Journal for Numerical Methods in Fluids, Vol. 69, Iss. 10, pp. 1614-1632, 2012

Shape dynamics, lipid hydrodynamics and the complex viscoelasticty of bilayer membranes
Rahimi, M. and Arroyo, M.
Physical Review E, Vol. 86, Num. 1, pp. 11932-11947, 2012

Condiciones de contorno en modelos de gradiente con desplazamientos suavizados
Tamayo-Mas, E. and Rodríguez-Ferran, A.
Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 28, Num. 3, pp. 170-176, 2012

Computable bounds of functional outputs in linear visco-elastodynamics
Verdugo, F. and Díez, P.
Computer Methods in Applied Mechanics and Engineering, Vol. 245-246, pp. 313-330, 2012

Adaptive reduced basis strategy based on goal oriented error assessment for stochastic problems
Florentin, E. and Díez, P.
Computer Methods in Applied Mechanics and Engineering, Vol. 225, pp. 116-127, 2012

Finite Element simulation of a local scale Air Quality Model over complex terrain
Oliver, A.; Montero, G.; Montenegro, R.; Rodríguez, E.; Escobar, J.M. and Pérez-Foguet, A.
Advances in Science and Research, Vol. 8, pp. 105-113, 2012

Modeling steel fiber reinforced concrete: numerical immersed boundary approach and a phenomenological mesomodel for concrete-fiber interaction
Pros, A.; Díez, P. and Molins, C.
International Journal for Numerical Methods in Engineering, Vol. 90, Issue 1, pp. 65-86, 2012

Proper Generalized Decomposition Based Dynamic Data-Driven Control of Material Forming Processes
Ghnatios, C.; Masson, F.; Huerta, A.; Leygue, A.; Cueto, E. and Chinesta, F.
Computer Methods in Applied Mechanics and Engineering, Vol. 213-216, pp. 29-41, 2012

A family of discontinuous Galerkin mixed methods for nearly and perfectly incompressible elasticity
Shen, Y. and Lew, A. J.
Mathematical Modelling and Numerical Analysis, Vol. 46, pp. 1003-1028, 2012

Thin-shell theory based analysis of radially pressurized multiwall carbon nanotubes
Shima, H.; Ghosh, S.; Arroyo, M.; Iiboshi, K. and Sato, M.
Computational Materials Science, Vol. 52, Issue 1, pp. 90-94, 2012

The receding front method applied to hexahedral mesh generation of exterior domains
Ruiz-Gironés, E.; Roca, X. and Sarrate, J.
Engineering with Computers, Vol. 28, Issue 4, pp. 391-408, 2012

A new bipenalty formulation for ensuring time step stability in time domain computational dynamics
Hetherington, J.; Rodríguez-Ferran, A. and Askes, H.
International Journal for Numerical Methods in Engineering, Vol. 90, Issue: 3, pp. 269-286, 2012

Viscoelastic and inelastic properties of the porcine carotid artery. Implications in animal cardiovascular device trials
Peña, E., García, A. and Martínez, M.A.
Journal of Biomechanics, Vol. 45, S29, Article number: , 2012

Viscoelastic properties of the passive mechanical behavior of the porcine carotid artery
García, A., Martínez, M. A. and Peña, E.
Biorheology, Vol. 49, Issue 4, pp. 271-288, 2012

Unsteady blood flow and mass transfer of a human left coronary artery bifurcation: FSI vs. CFD
Malvè, M., García, A., Ohayon, J. and Martínez, M. A.
International Communications in Heat and Mass Transfer, Vol. 39, Issue 6, pp. 745-751, 2012

Influence of geometrical parameters on radial force during self-expanding stent deployment. Application for a variable radial stiffness stent design
García, A., Peña, E. and Martínez, M. A.
Journal of the Mechanical Behavior of Biomedical Materials, Vol. 10, pp. 166-175, 2012

Evaluation of migration forces of a retrievable filter: Experimental setup and finite element study
García, A., Lerga, S., Peña, E., Malvè, M., Laborda, A., de Gregorio, M. A., Martínez, M. A.
Medical Engineering & Physics, Vol. 34, pp. 1167-1176, 2012

Numerical simulation of intergranular and transgranular crack propagation in ferroelectric polycrystals
Abdollahi, A. and Arias, I.
International Journal of Fracture, Vol. 174, Number 1, pp. 3-15, 2012

A biomechanical analysis of ventral furrow formation in the Drosophila melanogaster embryo
Conte, V.; Ulrich, F. ;Baum, B.; Muñoz, J.; Veldhuis, J.; Brodland, W. and Miodownik, M.
Plos ONE, Vol. 7, Num. 4, pp. 1-17, 2012

Quality and year-round availability of water delivered by improved water points in rural Tanzania: effects on coverage
Jiménez, A. and Pérez-Foguet, A.
Water Policy, Vol. 14, Issue 3, pp. 509-523, 2012

Trace Metal Content of Sediments Close to Mine Sites in the Andean Region
Yacoub, C.; Pérez-Foguet, A. and Miralles, N.
The Scientific World Journal, Vol. 2012, pp. 1-12, 2012

2011

Subduction dynamics and the origin of Andean orogeny and Bolivian Orocline
F. Capitanio, Faccena, C.; Zlotnik, S. and Stegman, D.
Nature, Vol. 480, pp. 83-86, 2011

3D NURBS-Enhanced Finite Element Method (NEFEM)
Sevilla, R;, Fernandez-Mendez, S. and Huerta A.
International Journal for Numerical Methods in Engineering, Vol. 88, Issue 2, pp. 103-125, 2011

NURBS-Enhanced Finite Element Method (NEFEM). A Seamless Bridge Between CAD and FEM
Sevilla, R.; Fernández-Méndez, S. and Huerta, A.
Archives of Computational Methods in Engineering, Vol. 18, Issue 4, pp. 441-484, 2011

Water Point Mapping for the Analysis of Rural Water Supply Plans: Case Study from Tanzania
Jiménez, A.; Pérez-Foguet, A.
ASCE Journal of Water Resources Planning and Management, Vol. 137, Issue: 5, pp. 439-447, 2011

Phase-field simulation of anisotropic crack propagation in ferroelectric single crystals: effect of microstructure on the fracture process
Abdollahi, A and Arias, I
Modelling and Simulation in Material Science and Engineering, Vol. 19, Issue 7, pp. 1-13, 2011

An anisotropic microsphere-based approach for fiber orientation adaptation in soft tissue
Sáez, P.; Pena, E.; Doblare, M.; Martinez, M.A.
IEEE Transactions on Biomedical Engineering, Vol. 58, Issue 12, pp. 3500-3503, 2011

Comparison of high-order curved finite elements
Sevilla, R.; Fernandez-Mendez, S. and Huerta, A.
International Journal for Numerical Methods in Engineering, Vol. 87, Issue 8, pp. 719-734, 2011

Damage regularisation with inertia gradients
Bennet, T.; Rodríguez-Ferran, A. and Askes, H.
European Journal of Mechanics - A/Solids, Vol. 31, Issue 1, pp. 131-138, 2011

Analyzing Water Poverty in Basins
Pérez-Foguet, A. and Giné, R.
Water Science and Technology, Vol. 25, Issue 14, pp. 3595-3612, 2011

Anisotropic microsphere-based approach to damage in soft fibered tissue
Sáez, P.; Alastrué, V; Peña, E.; Doblaré, M.; Martínez, M.A.
Biomechanics and Modeling in Mechanobiology, Vol. 11, pp. 595-608, 2011

Modeling dimensionally-heterogenenous problems: analysis, approximation and applications.
Blanco, P. J.; Discacciati, M. and Quarteroni, A.
Numerische Mathematik, Vol. 119, pp. 299-335, 2011

Numerical integration over 2D NURBS-shaped domains with applications to NURBS-enhanced FEM
Sevilla, R. and Fernández-Méndez S.
Finite Elements in Analysis and Design, Vol. 47, pp. 1209-1220, 2011

Using a computational domain and a three-stage node location procedure for multi-sweeping algorithms
Ruiz-Gironés, E., Roca, X. and Sarrate, J.
Advances in Engineering Software, Vol. 42, pp. 700-713, 2011

Estimation of the dispersion error in the numerical wave number of standard and stabilized finite element approximations of the Helmholtz equation
Steffens, L. M.; Parés, N. and Díez, P.
International Journal for Numerical Methods in Engineering, Vol. 86 Issue 10, pp. 1197-1224, 2011

A deterministic model of impact noise transmission through structural connections based on modal analysis
Díaz-Cereceda, C.; Hetherington, J.; Poblet-Puig, J. and Rodríguez-Ferran, A.
Journal of Sound and Vibration, Vol. 330, Issue 12, pp. 2801-2817, 2011

A general framework for softening regularisation based on gradient elasticity
Rodríguez-Ferran, A.;Bennett, T.; Askes, H. and Tamayo-Mas, E.
International Journal of Solids and Structures, Vol. 48, Issue 9, pp. 1382-1394, 2011

Phase-field modeling of the coupled microstructure and fracture evolution in ferroelectric single crystals
Abdollahi, A. and Arias, I.
Acta Materiala, Vol. 59, Issue 12, pp. 4733-4746, 2011

Numerical modeling of the Double Punch Test for plain concrete
Pros, A.; Díez, P. and Molins, C.
International Journal of Solids and Structures, Vol. 48, Issues 7-8, pp. 1229-1238, 2011

Métodos Runge-Kutta Implícitos de alto orden para flujo incompresible
Montlaur, A.; Fernández-Méndez, S. and Huerta A.
Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 27, Issue 1, pp. 77-91, 2011

Thin shell analysis from scattered points with maximum-entropy approximants
Millán, D; Rosolen, A and Arroyo, M.
International Journal for Numerical Methods in Engineering, Vol. 85, Iss. 6, pp. 723-751, 2011

Goal-oriented h-adaptivity for the Helmholtz equation: error estimates, local indicators and refinement strategies
Steffens, L. M.; Parés, N. and Díez, P.
Computational Mechanics, Vol. 47 Number 6, pp. 681-699, 2011

The relationship between technology and functionality of rural water points: evidence from Tanzania
Jiménez, A. and Pérez-Foguet, A.
Water Science and Technology, Vol. 63, Issue 5, pp. 948-955, 2011

The finite strip method for acoustic and vibroacoustic problems
Poblet-Puig, J. and Rodríguez-Ferran, A.
Journal of Computational Acoustics, Vol. 19, Number: 4, pp. 353-378, 2011

Melt fracturing and healing: a mechanism for rhyolite magma degassing and origin of obsidian
Cabrera, A.; Weinberg, R.; Wrigth, H.; Zlotnik, S. and Cas, R.
Geology, Vol. 39, pp. 67-70, 2011

Is arterial wall-strain stiffening an additional process responsible for atherosclerosis in coronary bifurcations?: in vivo study based on dynamic CT and MRI
Ohayon, J., Gharib, A. M., García, A., Heroux, J., Yazdani, S. K., Malvè, M., Tracqui, P., Martínez, M. A., Doblaré, M., Finet, G. and Pettigrew, R. I.
American Journal of Physiology-Heart and Circulatory Physiology, Vol. 301, Issue 3, pp. 1097-1106, 2011

Experimental study and constitutive modelling of the passive mechanical properties of the porcine carotid artery and its relation to histological analysis: implications in animal cardiovascular device trials
García, A. , Peña, E., Laborda, A., Lostalé, F., de Gregorio, M. A., Doblaré, M. and Martínez. M. A.
Medical Engineering & Physics, Vol. 33, Issue 6, pp. 83-102, 2011

The subductability of continental lithosphere: the before and after story
Afonso, J.C. and Zlotnik, S.
Frontiers in Earth Sciences, Vol. 1, pp. 53-86, 2011

Numerical modeling of erosion using an improvement of the extended finite element method
Cottereau, R and Díez, P
European Journal of Environmental and Civil Engineering, Vol. 15, pp. 1187-1206, 2011

Application of a revised Water Poverty Index to target the water poor
Gine, R., and Pérez-Foguet, A.
Water Science and Technology, Vol. 63, Issue: 6, pp. 1099-1110, 2011

Implementing pro-poor policies in a decentralized context: the case of the Rural Water Supply and Sanitation Program in Tanzania
Jiménez, A.; Pérez-Foguet, A.
Sustainability Science, Vol. 6, Issue 1, pp. 37-49, 2011

2010

Strict error bounds for linear and nonlinear solid mechanics problems using a patch-based flux-free method
Cottereau, R., Chamoin, L. and Díez, P.
Mécanique & Industries, Vol. 11 Number 3-4, pp. 249-254, 2010

Error Estimation and Quality Control
Diez, P.; Parés, N. and Huerta, A.
Encyclopedia of Aerospace Engineering, Wiley, Vol. 3, Part 15, Chapter 144, pp. 1725-1734, 2010

A multiplicative Schwarz method with active subdomains for transient convection-diffusion problems
Sandoval, M.L. and Rodríguez-Ferran, A.
Communications in Numerical Methods in Engineering, Vol. 26, Issue 12, pp. 1573-1585, 2010

Discontinuous Galerkin methods for the Navier-Stokes equations using solenoidal approximations
Montlaur, A.; Fernandez-Mendez,S.; Peraire, J. and Huerta, A.
International Journal for Numerical Methods in Fluids, Vol. 64, Issue 5, pp. 549-564, 2010

Improved method to calculate a Water Poverty Index at local scale
Giné, R. and Pérez-Foguet, A.
ASCE Journal of Environmental Engineering, Vol. 136, Issue 11, pp. 1287-1298, 2010

On the use of the Bingham statistical distribution in microsphere-based constitutive models for arterial tissue
Alastrué, V.; Sáez, P.; Martínez, M.A.; Doblaré, M.
Mechanics Research Communications, Vol. 37, Issue 8, pp. 700-706, 2010

Generation of structured hexahedral meshes in volumes with holes
Ruiz-Gironés, E. and Sarrate, J.
Finite Elements in Analysis and Design, Vol. 46, Issue 10, pp. 792-804, 2010

XFEM+: una modificación de XFEM para mejorar la precisión de los flujos locales en problemas de difusión con conductividades muy distintas
Cordero, F. and Díez, P.
Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 26, Issue 2, pp. 121-133, 2010

Local dual contributions: Representing dual surfaces for block meshing
Roca, X. and Sarrate, J.
International Journal for Numerical Methods in Engineering, Vol. 83, Issue 6, pp. 709-740, 2010

Diverse corrugation pattern in radially shrinking carbon nanotubes
Shima, H.; Sato, M.; Iiboshi K.; Ghosh S. and Arroyo M.
Physical Review B, Vol. 82, Issue 8, Article number: 85401, 2010

A flux-free a posteriori error estimator for the incompressible Stokes problem using a mixed FE formulation
Larsson, F; Díez, P and Huerta, A.
Computer Methods in Applied Mechanics and Engineering, Vol. 199, pp. 2383-2402, 2010

An automatic and general least-squares projection procedure for sweep meshing
Roca, X. and Sarrate, J.
Engineering with Computers, Vol. 26, Issue 4, pp. 391-406, 2010

Controls on subduction reorganization in the Hellenic margin, eastern Mediterranean
Capitanio, F.; Zlotnik, S. and Faccena, C.
Geophysical Research Letters, Vol. 37, pp. 1-5, 2010

Modeling, with a unified level-set representation, of the expansion of a hollow in the ground under different physical phenomena
Cottereau, R; Díez, P and Huerta, A
Computational Mechanics, Vol. 42, Issue 2, pp. 315-327, 2010

Building the role of local government authorities towards the achievement of the human right to water in rural Tanzania
Jiménez, A. and Pérez-Foguet, A.
Natural Resources Forum, Vol. 34, Issue 2, pp. 93-105, 2010

Challenges for water governance in rural water supply: lessons learnt from Tanzania
Jiménez, A. and Pérez-Foguet, A.
International Journal of Water Resources Development, Vol. 26, Issue 2, pp. 235-248, 2010

A new least-squares approximation of affine mappings for sweep algorithms
Roca, X., Sarrate, J and Huerta, A.
Engineering with Computers, Vol. 26, Issue 3, pp. 327-337, 2010

An error estimator for separated representations of highly multidimensional models
Ammar A; Chinesta F; Díez, P and Huerta, A
Computer Methods in Applied Mechanics and Engineering, Vol. 199, Issues 25-28, pp. 1872-1880, 2010

On the optimum support size in meshfree methods: a variational adaptivity approach with maximum entropy approximants
Rosolen, A,; Millán, D. and Arroyo, M.
International Journal for Numerical Methods in Engineering, Vol. 82, Issue 7, pp. 868-895, 2010

Bipenalty method for time domain computational dynamics
Askes, H.; Caramés-Saddler, M and Rodríguez-Ferran, A.
Proceedings of the Royal Society A, Vol. 466, pp. 1389-1408, 2010

Accurate recovery-based upper error bounds for the extended finite element framework
Ródenas, J.J.; González-Estrada, O.A.; Díez, P. and Fuenmayor, F.J.
Computer Methods in Applied Mechanics and Engineering, Vol. 199, pp. 2607-2621, 2010

SUPG-based stabilization using a separated representations approach
González, D.; Debeugny, L.; Cueto, E.; Chinesta, F.; Díez, P. and Huerta, A.
International Journal of Material Forming, Vol. 3, pp. 883-886, 2010

Error assessment and mesh adaptivity for regularized continuous failure models
Pannachet, T; Díez, P; Askes, H and Sluys, L. J.
Computer Methods in Applied Mechanics and Engineering, Vol. 199, Issues 17-20, pp. 961-978, 2010

The block Gauss-Seidel method in sound transmission problems
Poblet-Puig, J. and Rodríguez-Ferran, A
Journal of Computational Acoustics, Vol. 18, Issue 1, pp. 13-30, 2010

Generation of structured meshes in multiply connected surfaces using submapping
Ruiz-Gironés, E. and Sarrate, J.
Advances in Engineering Software, Vol. 41, Issue 2, pp. 379-387, 2010

Stress-dependent morphogenesis: continuum mechanics and truss systems
Muñoz, J; Conte, V and Miodownik, M
Biomechanics and Modeling in Mechanobiology, Vol. 9, Issue 4, pp. 451-467, 2010

Numerical framework for patient-specific computational modelling of vascular tissue
Alastrué, V., García, A., Peña, E., Rodríguez, J. F., Martínez, M. A. and Doblaré, M.
International Journal for Numerical Methods in Biomedical Engineering, Vol. 26, Issue 1, pp. 35-51, 2010

Assembling sparse matrices in MATLAB
Zlotnik, S. and Díez, P.
Communications in Numerical Methods in Engineering, Vol. 26, Issue 6, pp. 760-769, 2010

2009

Guaranteed energy error bounds for the Poisson equation using a flux-free approach: solving the local problems in subdomains
Parés, N., Santos, H., and Díez, P.
International Journal for Numerical Methods in Engineering, Vol. 79, Issue 10, pp. 1203-1244, 2009

Exact bounds for linear outputs of the advection-diffusion-reaction equation using flux-free error estimates
Parés, N., Díez, P., Huerta, A.
Journal on Scientific Computing (SIAM), Vol. 31, Issue 4, pp. 3064-3089, 2009

Experimental validation of large-scale simulations of dynamic fracture along weak planes
Chalivendra, V.B., Hong, S., Arias, I., Knap, J., Rosakis, A. J., Ortiz, M.
International Journal of Impact Engineering, Vol. 36, Issue 7, pp. 888-898, 2009

Hierarchical X-FEM for n-phase flow (n>2)
Zlotnik, S., Díez, P.
Computer Methods in Applied Mechanics and Engineering, Vol. 198 Issues 30-32, pp. 2329-2338, 2009

Elastic bending modulus of monolayer graphene
Lu, Q; Arroyo, M and Huang, R
Journal of Physics D: Applied Physics, Vol. 42, Issue10, pp. 102002-102009, 2009

Smooth, second order, non-negative meshfree approximants selected by maximum entropy
C.J. Cyron, M. Arroyo, M. Ortiz
International Journal for Numerical Methods in Engineering, Vol. 79, pp. 1605-1632, 2009

The role of studs in the sound transmission of double walls
Poblet-Puig, J., Rodríguez-Ferran, A., Guigou-Carter, C. and Villot, M.
Acta Acustica United with Acustica, Vol. 45, Issue 3, pp. 555-567, 2009

Strict error bounds for linear solid mechanics problems using a subdomain-based flux-free method
Cottereau, R; Díez, P and Huerta, A
Computational Mechanics, Vol. 44, Issue 4, pp. 533-547, 2009

Robust mechanisms of ventral furrow invagination require the combination of cellular shape changes
Conte, V.; Muñoz, J.; Baum, B. and Miodownik M.
Physical Biology, Vol. 6, Issue 1, pp. 16010-16021, 2009

Relaxation dynamics of fluid membranes
Arroyo, M. and DeSimone, A.
Physical Review E, Vol. 79, Issue 3, pp. 31914-31898, 2009

A simple strategy to assess the error in the numerical wave number of the Finite Element solution of the Helmholtz equation
Steffens, L.M.,Díez, P.
Computer Methods in Applied Mechanics and Engineering, Vol. 198, Issues 15-16, pp. 1389-1400, 2009

Effective coarse-grained simulations of super-thick multi-walled carbon nanotubes under torsion
Jian Zou, Xu Huang, Marino Arroyo, and Sulin Zhang
Journal of Applied Physics, Vol. 5, Issue 3, pp. 33516-9, 2009

Numerical modelling of the radiation efficiency of asymmetrical structures
Poblet-Puig, J., Rodríguez-Ferran, A., Guigou-Carter, C. and Villot, M.
Applied Acoustics, Vol. 70, Issue 5, pp. 777-780, 2009

Upper and lower bounds in limit analysis: adaptive meshing strategies and discontinuous loading
Muñoz, J.J., Bonet, J., Huerta, A., Peraire, J.
International Journal for Numerical Methods in Engineering, Vol. 77, Issue 4, pp. 471-501, 2009

Estima de error residual explícita para cantidades de interés utilizando funciones burbuja
Rosales, R. and Díez, P.
Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 25, Issue 4, pp. 337-357, 2009

Finite element simulation of flexor digitorum longus or flexor digitorum brevis tendon transfer for the treatment of claw toe deformity
García-González, A., Bayod, J., Prados-Frutos, J.C., Losa-Iglesias, M., Jules, K., de Bengoa-Vallejo R. B. and Doblaré, M.
Journal of Biomechanics, Vol. 42, Issue 11, pp. 1697-1704, 2009

International Investments in the Water Sector
Jiménez, A. and Pérez-Foguet, A.
International Journal of Water Resources Development, Vol. 25, Issue: 1, pp. 1-14, 2009

2008

Bounds for quantities of interest and adaptivity in the Element Free Galerkin method
Vidal, Y., Parés, N., Díez, P., Huerta, A.
International Journal for Numerical Methods in Engineering, Vol. 76, Issue 11, pp. 1782-1818, 2008

Improving water access indicators in developing countries: a proposal using water point mapping methodology
Jiménez, A. and Pérez-Foguet, A.
Water Science and Technology: Water Supply, Vol. 8, Issue 3, pp. 279-287, 2008

Extraction of a crack opening from a continuous approach using regularized damage models
Dufour, F., Pijaudier-Cabot, G., Choinska, M. and Huerta, A.
Computers and Concrete, Vol. Vol. 5, Issue 4, pp. 375-388, 2008

Effects of compositional and rheological stratifications on small-scale convection under the oceans: implications for the thickness of the oceanic lithosphere and seafloor flattening
Afonso, J.C.; Zlotnik, S. and Fernández, M.
Geophysical Research Letters, Vol. 35, pp. 1-5, 2008

NURBS-Enhanced Finite Element Method (NEFEM)
Sevilla, R., Fernandez-Mendez, S., Huerta, A.
International Journal for Numerical Methods in Engineering, Vol. 76, Issue 1, pp. 56-83, 2008

Small-scale gravitational instabilities under the oceans: implications for the evolution of oceanic lithosphere and its expression in geophysical observables
Zlotnik, S., Afonso, J.C., Díez, P, and Fernández, M.
Philosophical Magazine, Vol. 88, Issues 28-29, pp. 3197-3217, 2008

Discretización de superficies mútiplemente conexas mediante submapping
Ruiz-Gironés, E. y Sarrate, J.
Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 24, Issue 2, pp. 163-181, 2008

Modelling Gravitational Instabilities: Slab Break-off and Rayleigh-Taylor Diapirism
Zlotnik, S., Fernández, M., Díez, P. and Vergés, J.
Pure and Applied Geophysics, Vol. 165, Issue 8, pp. 1491-1510, 2008

Sustainability Assessment Of National Rural Water Supply Program In Tanzania
Giné, R. and Pérez-Foguet, A.
Natural Resources Forum, Vol. 32, Issue 4, pp. 287-302, 2008

NURBS-Enhanced Finite Element Method for Euler equations
Sevilla, R., Fernandez-Mendez, S., Huerta, A.
International Journal for Numerical Methods in Fluids, Vol. 57, Issue 9, pp. 1051-1069, 2008

Discontinuous Galerkin methods for the Stokes equations using divergence-free approximations
Montlaur, A., Fernández-Méndez, S., Huerta, A.
International Journal for Numerical Methods in Fluids, Vol. 57, Issue 9, pp. 1071-1092, 2008

On the modelling of incompressibility in linear and non-linear elasticity with the master-slave approach
Muñoz, J.J.
International Journal for Numerical Methods in Engineering, Vol. 74, Issue 2, pp. 269-293, 2008

A 3D finite element model of ventral furrow invagination in the Drosophila melanogaster embryo
Vito, C., Muñoz, J.J., Miodownik M.
Journal of the Mechanical Behavior of Biomedical Materials, Vol. 1, Issue 2, pp. 188-198, 2008

Introducing development education in technical universities: successful experiences in Spain
Boni, A. and Pérez-Foguet, A.
European Journal of Engineering Education, Vol. 33, Issue 3, pp. 343-354, 2008

A three-dimensional progressive damage model for fibre-composite materials
Curiel, JL, Petrinic, N. and Wiegand, J.
Mechanics Research Communications, Vol. 35, Issue 4, pp. 219-221, 2008

Optimization of a novel micro-opto-X-ray imaging lens
Ostadi, H., Arroyo, M., Prewett, P.D., Jiang, K.C. and Huq , S.E
Microelectronic Engineering, Vol. 85, Issues 5-6, pp. 1086-1088, 2008

Stability of incompressible formulations enriched with X-FEM
G. Legrain, N. Moes and A. Huerta
Computer Methods in Applied Mechanics and Engineering, Vol. 197, Issues 21-24, pp. 1835-1849, 2008

Rippling and a phase-transforming mesoscopic model for multiwalled carbon nanotubes
Arroyo, M., Arias I.
Journal of the Mechanics and Physics of Solids, Vol. 56, Issue 4, pp. 1224-1244, 2008

Bounds of functional outputs for parabolic problems. Part I: Exact bounds of the Discontinuous Galerkin time discretization
Parés, N., Díez, P. and Huerta, A..
Computer Methods in Applied Mechanics and Engineering, Vol. 197, Issues 19-20, pp. 1641-1660, 2008

Bounds of functional outputs for parabolic problems. Part II: Bounds of the exact solution
Parés, N., Díez, P. and Huerta, A..
Computer Methods in Applied Mechanics and Engineering, Vol. 197, Issues 19-20, pp. 1661-1679, 2008

Size dependent nonlinear elastic scaling of multiwalled carbon nanotubes
Arias I., Arroyo, M.
Physical Review Letters, Vol. 100, Issue 8, Article number: 85503, 2008

Modelling unilateral frictionless contact using the null-space method and cubic B-Spline interpolation
Muñoz, J.J.
Computer Methods in Applied Mechanics and Engineering, Vol. 197, Issues 9-12, pp. 979-993, 2008

2007

Numerical Modelling of Tectonic Plates Subduction using X-FEM
Zlotnik, S., Díez, P., Fernández, M. and Vergés, J.
Computer Methods in Applied Mechanics and Engineering, Vol. 196, Issues 41-44, pp. 4283-4293, 2007

Stabilized updated Lagrangian corrected SPH for explicit dynamic problems
Vidal, Y., Bonet, J. and Huerta, A.
International Journal for Numerical Methods in Engineering, Vol. 69, Issue 13, pp. 2687-2710, 2007

A deformation gradient decomposition method for the analysis of the mechanics of morphogenesis
Muñoz, J.J., Barrett, K., Miodownik M.
Journal of Biomechanics, Vol. 40, Issue 6, pp. 1372-1380, 2007

Goal oriented error estimation for the Element Free Galerkin method
Vidal, Y. and Huerta, A.
Lecture Notes on computational science and engineering, Vol. 57, pp. 265-282, 2007

On the geometric character of stress in continuum mechanics
Kanso E., Arroyo M., Tong Y., Yavari A., Marsden J.E. and Desbrun M
Zeitschrift für Angewandte Mathematik und Physik (ZAMP), Vol. 58, Issue 5, pp. 843-856, 2007

Numerical modelling and experimental validation of dynamic fracture events along weak planes
I. Arias, J. Knap, V. Chalivendra, S. Hong, M. Ortiz and A.J. Rosakis
Computer Methods in Applied Mechanics and Engineering, Vol. 196, Issues 37-40, pp. 3833-3840, 2007

Experimental testing of joints for seismic design of lightweight structures. Part 3: Gussets, corner joints, x-braced frames.
Casafont M, Arnedo A, Roure F, Rodriguez-Ferran A
Thin-Walled Structures, Vol. 45, Issues 7-8, pp. 637-659, 2007

Hydraulic behaviour of a representative structural volume for containment buildings
Jason, L., Pijaudier-Cabot , G., Ghavamian, S., Huerta, A.
Nuclear Engineering and Design, Vol. 237, Issues 12-13, pp. 1259-1274, 2007

Numerical Performance of Incomplete Factorizations for 3D Transient Convection-Diffusion Problems
A. Rodríguez-Ferran and M. L. Sandoval
Advances in Engineering Software, Vol. 38, Issue 6, pp. 439-450, 2007

Minimización de la distorsión de mallas formadas por cuadriláteros o hexaedros
Sarrate, J. y Coll, A.
Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 23, Issue 1, pp. 55-76, 2007

Equilibrated Patch Recovery error estimates: simple and accurate upper bounds of the error
Diez, P., Rodenas, J.J. and Zienkiewicz, O.C.
International Journal for Numerical Methods in Engineering, Vol. 69, Issue 10, pp. 2075-2098, 2007

Goal-oriented error estimation for transient parabolic problems
Pedro Díez, Giovanni Calderón
Computational Mechanics, Vol. 39, Issue 5, pp. 631-646, 2007

Remeshing criteria and proper error representations for goal oriented h-adaptivity
Díez, P. and Calderon, G.
Computer Methods in Applied Mechanics and Engineering, Vol. 196, Issue 4, pp. 719-733, 2007

2006

Updated Lagrangian formulation for corrected Smooth Particle Hydrodynamics
Huerta, A., Vidal, Y. and Bonet, J.
International Journal of Computational Methods, Vol. 3, Issue 4, pp. 383-399, 2006

Sliding joints in 3D beams: Conserving algorithms using the master-slave approach
Muñoz, J and Jelenic
Multibody System Dynamics, Vol. 16, Issue 3, pp. 237-261, 2006

On the numerical simulation of fatigue driven delamination with interface elements
Muñoz, J; Galvanetto, U and Robinson, P
International Journal of Fatigue, Vol. 28, Issue 10, pp. 1136-1146, 2006

Análisis de diferentes estimadores de error de postproceso para adaptatividad orientada al resultado
Giovanni Calderón y Pedro Díez
Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 22 Issue 2, pp. 193-213, 2006

An elastic plastic damage formulation for concrete: application to elementary and structural tests
Jason, L. Huerta, A. Pijaudier-Cabot, G and Ghavamian, S.
Computer Methods in Applied Mechanics and Engineering, Vol. 195, Issue 52, pp. 7077-7092, 2006

Experimental testing of joints for seismic design of lightweight structures. Part 2: Bolted joints in straps*
Casafont, M., Arnedo, A., Roure, F., and Rodríguez-Ferran, A.
Thin-Walled Structures, Vol. 44, Issue 6, pp. 677-691, 2006

Mesh projection between parametric surfaces
X. Roca, J. Sarrate and A. Huerta
Communications in Numerical Methods in Engineering, Vol. 22, Issue 6, pp. 591-603, 2006

Experimental testing of joints for seismic design of lightweight structures. Part 1: screwed joints in straps
Casafont, M., Arnedo, A., Roure, F. and Rodríguez-Ferran, A.
Thin-Walled Structures, Vol. 44, Issue 2, pp. 131-270, 2006

Étude de la stabilité d'une formulation incompressible traitée par X-FEM
Legrain, G., Moes, N. and Huerta, A.
European Journal of Computational Mechanics (Revue Européenne de Mécanique Numérique), Vol. 15, Issues 1, 2, 3, pp. 257-268, 2006

A phenomenological cohesive model of ferroelectric fatigue
I. Arias, S. Serebrinsky, M. Ortiz
Acta Materiala, Vol. 54, Issue 4, pp. 975-984, 2006

Local maximum-entropy approximation schemes: a seamless bridge between finite elements and meshfree methods
Marino Arroyo and Michael Ortiz
International Journal for Numerical Methods in Engineering, Vol. 65, Issue 13, pp. 2167-2202, 2006

Preface
N.-E. Wiberg and P. Díez
Computer Methods in Applied Mechanics and Engineering, Vol. 195, Issues 4-6, pp. 205-206, 2006

Computing upper and lower bounds for the J-integral in two-dimensional linear elasticity
Z.C. Xuan, N. Parés and J. Peraire
Computer Methods in Applied Mechanics and Engineering, Vol. 195, pp. 430-443, 2006

The computation of bounds for linear-functional outputs of weak solutions to the two-dimensional elasticity equations
N. Parés, J. Bonet, A. Huerta and J. Peraire
Computer Methods in Applied Mechanics and Engineering, Vol. 195, Issues 4-6, pp. 406-429, 2006

Subdomain-based flux-free a posteriori error estimators
Núria Parés, Pedro Díez and Antonio Huerta
Computer Methods in Applied Mechanics and Engineering, Vol. 195, Issues 4-6, pp. 297-323, 2006

2005

Continuum mechanics modeling and simulation of carbon nanotubes
Marino Arroyo and Ted Belytschko
Meccanica, Vol. 40, Issues 4-6, pp. 455-469, 2005

Hysteretic modelling of x-braced shear walls
Pastor, N. and Rodríguez-Ferran, A.
Thin-Walled Structures, Vol. 43, Issue 10, pp. 1567-1588, 2005

Development education and engineering: a framework for incorporating reality of developing countries into engineering studies
A. Pérez-Foguet, S. Oliete-Josa, A. Saz-Carranza
International Journal of Sustainability in Higher Education, Vol. Vol. 6, Issue 3, pp. 278-303, 2005

Continuous blending of SPH with finite elements
Sonia Fernández-Méndez, Javier Bonet and Antonio Huerta
Computers and Structures, Vol. 83, Issues 17-18, pp. 1448-1458, 2005

A new damage model based on nonlocal displacements
Rodríguez-Ferran, A., Morata, I. and Huerta, A.
International Journal for Numerical and Analytical Methods in Geomechanics, Vol. Vol 29, Issue 5, pp. 473-493, 2005

2004

Sliding contact conditions using the master-slave approach with application on geometrically non-linear beams
Muñoz, J and Jelenic, G
International Journal of Solids and Structures, Vol. 41, Issues 24–25, pp. 6963-6992, 2004

Arbitrary Lagrangian-Eulerian methods
Donea, J., Huerta, A., Ponthot, J.-Ph. and Rodríguez-Ferran, A.
Encyclopedia of Computational Mechanics , Vol. 1, Chapter 14, pp. 413-437, 2004

Meshfree Methods
Huerta, A., Belytschko, T. Fernández-Méndez, S. and Rabczuk, T.
Encyclopedia of Computational Mechanics , Vol. 1, Chapter 10, pp. 279-309, 2004

Benchmarks for the validation of a non local damage model
Ludovic Jason, Shahrokh Ghavamian, Gilles Pijaudier-Cabot, Antonio Huerta
Revue française de Génie civil, Vol. 8, Issue 2 -3, pp. 303-328, 2004

Accurate upper and lower error bounds by solving flux-free local problems in "stars"
Díez, P., Parés, N. y Huerta, A.
European Journal of Finite Elements (Revue Européenne des éléments finis), Vol. 13, Issue 5-6-7/2004, pp. 497-507, 2004

Preface
Huerta, A. and Rodríguez-Ferran, A.
Computer Methods in Applied Mechanics and Engineering, Vol. 193, Issues 39-41, pp. 3-4, 2004

Rayleigh wave correction for the BEM analysis of two-dimensional elastodynamic problems in a half-space
Arias, I., Achenbach, J.D.
International Journal for Numerical Methods in Engineering, Vol. 60, Issue 13, pp. 2131-2146, 2004

Efficient and Reliable Nonlocal Damage Models
Rodríguez-Ferran, A., Morata, I. and Huerta, A.
Computer Methods in Applied Mechanics and Engineering, Vol. 193, Issues 30, 32, pp. 3431-3455, 2004

Use of reciprocity considerations for the two-dimensional BEM analysis of wave propagation in an elastic half-space with applications to acoustic emission
Arias, I., Achenbach, J.D.
Wave Motion, Vol. 39, Issue 4, pp. 281-294, 2004

A comparison of two formulations to blend finite elements and mesh-free methods
Huerta, A., Fernández-Méndez. S. and Liu, W.K.
Computer Methods in Applied Mechanics and Engineering, Vol. 193, Issue 12-14, pp. 1105-1117, 2004

Finite crystal elasticity of carbon nanotubes based on the exponential Cauchy-Born rule
Arroyo, M., Belytschko, T.
Physical Review B, Vol. 69, Article number: 115415, 2004

Pseudo-divergence-free element free Galerkin method for incompressible fluid flow
Huerta, A., Vidal, Y. and Villon, P.
Computer Methods in Applied Mechanics and Engineering, Vol. 193, Issue 12 - 14, pp. 1119-1136, 2004

Imposing essential boundary conditions in mesh-free methods
Fernández-Méndez, S. and Huerta, A.
Computer Methods in Applied Mechanics and Engineering, Vol. 193, Issues 12 -14, pp. 1257-1275, 2004

Numerical modelling of void inclusions in porous media
Rodríguez-Ferran, A., Sarrate, J. and Huerta, A.
International Journal for Numerical Methods in Engineering, Vol. 59, Issue 4, pp. 577-596, 2004

Finite element methods for the non-linear mechanics of crystalline sheets and nanotubes
Arroyo, M., Belytschko, T.
International Journal for Numerical Methods in Engineering, Vol. 59, Issue 3, pp. 419-456, 2004

Computing bounds for linear functionals of exact weak solutions to Poisson's equation
A. M. Sauer-Budge, J. Bonet, A. Huerta, and J. Peraire
Journal on Numerical Analysis (SIAM), Vol. 42, Issue 4, pp. 1610-1630, 2004

A model for the ultrasonic detection of surface-breaking cracks by the Scanning Laser Source technique
Arias, I., Achenbach, J. D.
Wave Motion, Vol. 40, Issue 1, pp. 61-75, 2004

2003

Thermoelastic generation of ultrasound by line-focused laser irradiation
Arias, I., Achenbach, J. D.
International Journal of Solids and Structures, Vol. 40, Issue 25, pp. 6917-6935, 2003

Nonlinear mechanical response and rippling of thick multi-walled carbon nanotubes
Arroyo, M., Belytschko,T.
Physical Review Letters, Vol. 91, Issue 21, Article number: , 2003

Estudio numérico del control exacto desde el contorno de la ecuación Korteweg-de Vries lineal
Capella-Kort, A. and Sarrate, J.
Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 19, Issue 2, pp. 145-148, 2003

Convergence of finite elements enriched with meshless methods
Fernández-Méndez, S., Díez, P. and Huerta, A.
Numerische Mathematik, Vol. 96, Issue 1, pp. 43-59, 2003

A note on the convergence of the secant method for simple and multiple roots
Pedro Díez
Applied Mathematics Letters, Vol. 16, Issue 8, pp. 1211-1215, 2003

Goal-oriented adaptivity for shell structures: Error assessment and remeshig criteria
Díez, P., Morata, I. and Huerta A.
European Journal of Finite Elements (Revue Européenne des éléments finis), Vol. 12, Issue 6, pp. 691-715, 2003

Master-slave approach for the modelling of joints with dependent degrees of freedom in flexible mechanisms
Muñoz, J; Jelenic, G and Crisfield, MA
Communications in Numerical Methods in Engineering, Vol. 19, Issue 9, pp. 689-702, 2003

Numerical representation of the quality measures of triangles and triangular meshes
Sarrate, J., Palau, J., and Huerta, A.
Communications in Numerical Methods in Engineering, Vol. 19, Issue 7, pp. 551-561, 2003

Efficient and accurate approach for powder compaction problems
Pérez - Foguet, A., Rodríguez-Ferran, A. and Huerta, A.
Computational Mechanics, Vol. 30, Issue 3, pp. 220-234, 2003

A finite deformation membrane based on inter-atomic potentials for the transverse mechanics of nanotubes
Arroyo, M., Belytschko, T.
Mechanics of Materials, Vol. 35, Issues 3-6, pp. 193-215, 2003

Locking in the incompressible limit: pseudo-divergence-free element free Galerkin
Yolanda Vidal, Pierre Villon and Antonio Huerta
Communications in Numerical Methods in Engineering, Vol. 19, Issue 9, pp. 725-735, 2003

Recovering lower bounds of the error by postprocessing implicit residual a posteriori error estimates
Díez, P., Parés; N. And Huerta,A.
International Journal for Numerical Methods in Engineering, Vol. 56, Issue 10, pp. 1465-1488, 2003

Time accurate consistently stabilized mesh-free methods for convection dominated problems
Huerta, A. and Fernández-Méndez, S.
International Journal for Numerical Methods in Engineering, Vol. 56, Issue 9, pp. 1225-1242, 2003

2002

Arbitrary Lagrangian-Eulerian (ALE) formulation for hyperelastoplasticity
Rodríguez-Ferran, A., Pérez-Foguet, A. and Huerta, A.
International Journal for Numerical Methods in Engineering, Vol. 53, Issue 8, pp. 1831-1851, 2002

The efficient computation of bounds for functionals of finite element solutions in large strain elasticity
J. Bonet, A. Huerta and J. Peraire
Computer Methods in Applied Mechanics and Engineering, Vol. 191, Issue 43, pp. 4807-4826, 2002

An atomistic-based finite deformation membrane for single layer crystalline films
Arroyo, M., Belytschko, T.
Journal of the Mechanics and Physics of Solids, Vol. 50, Issue 9, pp. 1941-1977, 2002

Time-accurate solution of stabilized convection-diffusion-reaction equations: II. Accuracy analysis and examples
Antonio Huerta, Bernardino Roig and Jean Donea
Communications in Numerical Methods in Engineering, Vol. 18, Issue 8, pp. 575-584, 2002

Time-accurate solution of stabilized convection-diffusion-reaction equations: I. Time and space discretization
Antonio Huerta and Jean Donea
Communications in Numerical Methods in Engineering, Vol. 18, Issue 8, pp. 565-573, 2002

Enrichissement des interpolations d'éléments finis en utilisant des méthodes de particules
Huerta, A., Fernández-Méndez, S. and Díez, P.
Mathematical Modelling and Numerical Analysis, Vol. 36, Issue 6, pp. 1027-1042, 2002

Error estimation and adaptivity for nonlinear FE analysis
Antonio Huerta, Antonio Rodríguez-Ferran and Pedro Díez
International Journal of Applied Mathematics and Computer Sciences, Vol. 12, Issue 1, pp. 59-70, 2002

On the formulation of closest-point projection algorithms in elastoplasticity. Part I: The variational structure
Armero, F. and Pérez-Foguet, A.
International Journal for Numerical Methods in Engineering, Vol. 53, Issue 2, pp. 297-329, 2002

On the Formulation of Closest-Point Projection Algorithms in Elastoplasticity. Part II: Globally Convergent Schemes. With applications to deviatoric and pressure-dependent plastic models.
Pérez-Foguet, A. and Armero, F.
International Journal for Numerical Methods in Engineering, Vol. 53, Issue 2, pp. 331-374, 2002

Locking in the incompressible limit: pseudo-divergence-free element free Galerkin
Yolanda Vidal, Pierre Villon and Antonio Huerta
European Journal of Finite Elements (Revue Européenne des éléments finis), Vol. 11, Issue 7-8, pp. 869-891, 2002

Coupling finite elements and particles for adaptivity: an application to consistently stabilized convection-diffusion
Fernández-Méndez, S. and Huerta, A.
Lecture Notes on computational science and engineering, Vol. 26, pp. 117-130, 2002

Generación automática de malllas no estructuradas y formadas exclusivamente por cuadriláteros sobre superficies curvas en R3
Sarrate, J. and Huerta, A.
Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 18, Issue 1, pp. 79-93, 2002

2001

Implementation of a stabilized finite element formulation for the incompressible Navier-Stokes equations based on a pressure gradient projection
Ramon Codina, Jordi Blasco, Gustavo C. Buscaglia and Antonio Huerta
International Journal for Numerical Methods in Fluids, Vol. 37, Issue 4, pp. 419-444, 2001

Consistent tangent matrices for density-dependent finite plasticity models
Pérez-Foguet, A., Rodríguez-Ferran, A. and Huerta, A.
International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 25, Issue 11, pp. 1045-1075, 2001

Probabilistic analysis of an a posteriori error estimator for finite elements
Díez, P. and Egozcue, J.J.
Mathematical Models and Methods in Applied Sciences, Vol. 11, Issue 5, pp. 841-854, 2001

Consistent Tangent Matrices for Substepping Schemes
Pérez-Foguet, A., Rodríguez-Ferran, A. and Huerta, A.
Computer Methods in Applied Mechanics and Engineering, Vol. 190, Issues 35, 36, pp. 4627-4647, 2001

A combined rh-adaptive scheme based on domain subdivision. Formulation and linear examples.
Askes, H and Rodríguez-Ferran, A.
International Journal for Numerical Methods in Engineering, Vol. 51, Issue 3, pp. 253-273, 2001

Locking in the incompressible limit for the element-free Galerkin method
Huerta, A. and Fernández-Méndez, S.
International Journal for Numerical Methods in Engineering, Vol. 51, Issue 11, pp. 1361-1383, 2001

Arbitrary Lagrangian-Eulerian formulation for fluid-rigid body interaction
Sarrate, J., Huerta, A. and Donéa, J.
Computer Methods in Applied Mechanics and Engineering, Vol. 190, Issues 24, 25, pp. 3171-3188, 2001

An improved Algorithm to Smooth Graded Quadrilateral Meshes Preserving the Prescribed Element Size
Sarrate, J. and Huerta, A.
Communications in Numerical Methods in Engineering, Vol. 17, Issue 2, pp. 89-99, 2001

Adaptive analysis based on error estimation for nonlocal damage models
Rodríguez-Ferran, A., Arbós, I, and Huerta, A.
European Journal of Finite Elements (Revue Européenne des éléments finis), Vol. 10 Issues 2, 3 & 4, pp. 193-207, 2001

Arbitrary Lagrangian-Eulerian Simulation of Powder Compaction Processes
Pérez-Foguet, A., Rodríguez-Ferran, A. and Huerta, A.
International Journal of Forming Processes, Vol. 4 Issues 3, 4, pp. 535-549, 2001

El Método de los Elementos Finitos en problemas electromagnéticos: planteamiento y aplicaciones
Josep Sarrate y Ramon Clarisó
Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 17, Issue 2, pp. 219-248, 2001

2000

Error estimation and adaptivity for nonlocal damage models
Rodríguez-Ferran, A. and Huerta, A.
International Journal of Solids and Structures, Vol. 37, Issue 48-50, pp. 7501-7528, 2000

Efficient unstructured quadrilateral mesh generation
Sarrate, J. and Huerta, A.
International Journal for Numerical Methods in Engineering, Vol. 49, Issue 10, pp. 1327-1350, 2000

Enrichment and Coupling of the Finite Element and Meshless Methods
Huerta, A. and Fernández-Méndez, S.
International Journal for Numerical Methods in Engineering, Vol. 48, Issue 11, pp. 1615-1636, 2000

Numerical differentiation for non-trivial consistent tangent matrices: an application to the MRS-Lade model
Pérez-Foguet, A., Rodríguez-Ferran, A. and Huerta, A.
International Journal for Numerical Methods in Engineering, Vol. 48, Issue 2, pp. 159-184, 2000

High-order accurate time-stepping schemes for convection-diffusion problems
Donéa, J., Roig, B. and Huerta, A.
Computer Methods in Applied Mechanics and Engineering, Vol. 182, Issues 3, 4, pp. 249-275, 2000

Adaptivity based on error estimation for viscoplastic softening materials
Díez, P., Arroyo, M. and Huerta, A.
Mechanics of Cohesive-Frictional Materials, Vol. 5, Issue 2, pp. 87-112, 2000

Error Estimation Including Pollution Assessment for Nonlinear Finite Element Analysis
Huerta, A. and Díez, P.
Computer Methods in Applied Mechanics and Engineering, Vol. 181, Issues 1,3, pp. 21-41, 2000

Numerical differentiation for local and global tangent operators in computational plasticity
Pérez-Foguet, A., Rodríguez-Ferran, A. and Huerta, A.
Computer Methods in Applied Mechanics and Engineering, Vol. 189, Issue 1, pp. 277-296, 2000

Error estimation for adaptive computations on shell structures
Díez, P., and Huerta, A.
European Journal of Finite Elements (Revue Européenne des éléments finis), Vol. 9, Issue 1, 2 i 3,/2000, pp. 49-66, 2000

1999

Adapting Broyden Method to Handle Linear Constraints Imposed via Lagrange Multipliers
Rodríguez-Ferran, A. and Huerta, A.
International Journal for Numerical Methods in Engineering, Vol. 46, Issue 12, pp. 2011-2026, 1999

Adaptive finite element strategies based on error assessment
Huerta, A., Rodríguez-Ferran, A., Díez, P. and Sarrate, J.
International Journal for Numerical Methods in Engineering, Vol. 46, Issue 10, pp. 1803-1818, 1999

A Posteriori Finite Element Error Bounds for Nonlinear Outputs of the Helmholtz Equation
Sarrate, J., Peraire, J. and Patera
International Journal for Numerical Methods in Fluids, Vol. 31, Issue 1, pp. 17-36, 1999

Accuracy of two stress update algorithms for shear-free large deformations paths
Rodríguez-Ferran, A. and Huerta, A.
Journal of Engineering Mechanics (ASCE), Vol. 125, Issue 6, pp. 715-717, 1999

Plastic flow potential for cone region on the MRS-Lade model
Pérez-Foguet, A. and Huerta, A.
Journal of Engineering Mechanics (ASCE), Vol. 125, Issue 3, pp. 364-367, 1999

Adaptive analysis of yield line patterns in plates with the Arbitrary Lagrangian-Eulerian method
Askes, H., Rodríguez-Ferran, A. and Huerta, A.
Computers and Structures, Vol. 70, Issue 3, pp. 257-271, 1999

A unified approach to remeshing strategies for finite element h-adaptivity
Díez, P. and Huerta, A.
Computer Methods in Applied Mechanics and Engineering, Vol. 176, Issues 1, 4, pp. 215-229, 1999

Analysis of the vane test considering size and time effects
Pérez-Foguet, A., Ledesma, A. and Huerta, A.
International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 23, Issue 5, pp. 383-412, 1999

1998

A fractional-step method for the incomprensible Navier-Stokes equations related to a predictor-multicorrector algorithm
Blasco, J., Codina, R. and Huerta, A.
International Journal for Numerical Methods in Fluids, Vol. 28, Issue 10, pp. 1391-1419, 1998

ALE Stress Update for Transient and Quasistatic Processes
Rodríguez-Ferran, A., Casadei, F. and Huerta, A.
International Journal for Numerical Methods in Engineering, Vol. 43, Issue 2, pp. 241-262, 1998

A posteriori error estimation for standard finite element analysis
Díez, P., Egozcue, J.J. and Huerta, A.
Computer Methods in Applied Mechanics and Engineering, Vol. 163, Issues 1,4, pp. 141-157, 1998

Comparing Two Algorithms to Add Large Strains to Small Strain Finite Element Code
Rodríguez-Ferran, A. and Huerta, A.
Journal of Engineering Mechanics (ASCE), Vol. 124, Issue 9, pp. 939-948, 1998

Un estimador de error residual para el método de los elementos finitos
Díez, P., Egozcue, J.J. and Huerta, A.
Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 14, Issue 4, pp. 557-582, 1998

1997

Two Stress Update Algorithms for Large Strains: Accuracy Analysis and Numerical Implementation
Rodríguez-Ferran, A., Pegon, P. and Huerta, A.
International Journal for Numerical Methods in Engineering, Vol. 40, Issue 23, pp. 4363-4404, 1997

A note on a numerical benchmark test: An axisymmetric shell under ring loads
Vila, A., Rodríguez-Ferran, A. and Huerta, A.
Communications in Numerical Methods in Engineering, Vol. 13, Issue 3, pp. 181-192, 1997

Vulnerabilidad sísmica y toma de decisiones
Egozcue, J.J., Simarro, G. and Díez, P.
Revista Internacional de Cálculo de Estructuras, Vol. 174, pp. 35-58, 1997

1995

Arbitrary Lagrangian-Eulerian finite element analysis of strain localization in transient problems
Pijaudier-Cabot, G., Bodé, L. and Huerta, A.
International Journal for Numerical Methods in Engineering, Vol. 38, Issue 24, pp. 4171-4191, 1995

La Programación orientada al objeto aplicada al cálculo por el método de los elementos finitos
Bretones, M.A., Rodríguez-Ferran, A. and Huerta, A.
Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, Vol. 11, Issue 3, pp. 423-449, 1995

1994

Discretization Influence on the Regularization by two Localization Limiters
Huerta, A. and Pijaudier-Cabot, G.
Journal of Engineering Mechanics (ASCE), Vol. 120, Issue 6, pp. 1198-1218, 1994

New ALE Applications in Non-Linear Fast-Transient Solid Dynamics
Huerta, A. and Casadei, F.
Engineering Computations, Vol. 11 Issue 4, pp. 317-345, 1994

1993

Shallow structure of part of northwstern Iberia from short-period Rayleigh-wave observations
Sarrate, J., Canas, J.A., Pujades, L., Badal, J., Corchete, V. and Payo, G.
Tectonophysics, Vol. 221, Issue 1, pp. 95-105, 1993

1992

Numerical Analysis of Nonlinear Large-Strain Consolidation and Filling
Huerta, A. and Rodríguez-Ferran, A.
Computers and Structures, Vol. 44, Issue 1-2, pp. 357-365, 1992

1991

Spectral analysis of the Beznar dam accelerogram. Comparison with results in the northeastern of Spain
Canas, J.A., Barbat, H.A., Pujades, L., Egozcue, J.J., Sarrate, J.,
Monografías - Instituto Geográfico Nacional, Vol. 8, pp. 363-376, 1991

Particle injection in LSI+61º303 radio outburst
Paredes, J.M., Martí,J., Estalella, R and Sarrate, J.
Astronomy and Astrophisics, Vol. 248, Issue 1, pp. 124-128, 1991

Finite Element Analysis of Bifurcation in Nonlocal Strain Softening Solids
Pijaudier-Cabot, G. and Huerta, A.
Computer Methods in Applied Mechanics and Engineering, Vol. 90, Issues 1, 3, pp. 905-919, 1991

1990

Large-Amplitude Sloshing With Submerged Blocks
Huerta, A. and Liu, W.K.
Journal Pressure Vessel Technology, Vol. 112, Issue 1, pp. 104-108, 1990

1988

Permeability and Compressibility of Slurries from Seepage-Induced Consolidation
Huerta, A., Kriegsmann, G.A. and Krizek, R.K.
Journal of Geotechnical Engineering (ASCE), Vol. 115, pp. 614-627, 1988

Viscous Flow Structure Interaction
Huerta, A. and Liu, W.K.
Journal Pressure Vessel Technology, Vol. 110, Issue 1, pp. 15-21, 1988

Viscous flow with large free surface motion
Antonio Huerta and Win Kam Liu
Computer Methods in Applied Mechanics and Engineering, Vol. 69, Issue 3, pp. 277-324, 1988

Publications

Publications

Forthcoming

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

1995

1994

1993

1992

1991

1990

1988